Modem: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
Line 43: Line 43:
route -n
route -n
You can test that ppp0 is added as an interface. If it is there, you can start using Internet on XO!
You can test that ppp0 is added as an interface. If it is there, you can start using Internet on XO!



[[Image:XO_with_CDMA_Modem.jpg|thumb|center|450px|Working setup]]
[[Image:XO_with_CDMA_Modem.jpg|thumb|center|450px|Working setup]]

===Why/How to share internet among other XOs===

As the modem is costly, therefore if one XO is setup as Mesh Portal Point (MPP), other XOs can access internet with its help. Thus, internet can be shared among the XOs.

Following steps are needed to make XO with a modem work as MPP.


THIS SECTION IS UNDER CONSTRUCTION!



==Work in progress here==
==Work in progress here==

Revision as of 22:25, 10 June 2008

OlpcProject.png Adviser: Michail Bletsas, Development: Ankur Verma

see more templates or propose new

Internet Connectivity using Mobile Technologies (3G, GPRS, CDMA)

Motivation

These different technologies use the infrastructure of mobile telephone networks. Recently there has been a boom in the development of these technologies as exemplified by the following facts:

  • Tanzania: The deployment of the 3G network by Vodacom, deployment of CDMA 800 networks by TTCL and Zantel, deployment of CDMA 450 network by BOL. Excerpted from [1]
  • India: This is the only option for users in rural areas where no other means of broadband Internet are available. GPRS Enabled Cell Phone costs around $10 p.m., Some vendors charge about $0.025 per megabyte. Excerpted from [2]
  • Beijing: 6-month plan costs RMB650 and an annual plan that includes a high-end GPRS modem costs RMB2400, which can work anywhere in China. Excerpted from [3]
  • Finland: GPRS will be suitable option in the rural areas for offering the Internet connectivity in the near future. Excerpted from [4]

How to connect XO to Internet using Franklin CDU-680DOrA Mobile Broadband USB Modem

The following steps are needed to have this modem working with XO:

1. Insert the modem into any USB slot on XO. The device will be shown as a removable storage.

2. Copy [5] to /home/olpc/ folder on XO using

cp -r cdmamodem.zip /home/olpc

Please See: If you are copying these files at different path, you need to change DPATH variable in modemXO script.

3. Unzip it using

unzip cdmamodem.zip

4. Run modemXO script using

bash modemXO or ./modemXO or bash /home/olpc/cdmamodem/modemXO

Please Note: Necessary Packages will be installed by the script modemXO automatically

  • Wvdial : wvdial-1.54.0-5.2.2.1.i386.rpm
  • PPP: ppp-2.4.4-2.i386.rpm
  • Libwvstreams: libwvstreams-4.2.2-3.fc7.i386.rpm

5. Using command

route -n

You can test that ppp0 is added as an interface. If it is there, you can start using Internet on XO!

Working setup

Why/How to share internet among other XOs

As the modem is costly, therefore if one XO is setup as Mesh Portal Point (MPP), other XOs can access internet with its help. Thus, internet can be shared among the XOs.

Following steps are needed to make XO with a modem work as MPP.


THIS SECTION IS UNDER CONSTRUCTION!


Work in progress here

Working on finding a generic way of interfacing most modems with XO

Ideas

Acknowledgments

  • Michail Bletsas - (my adviser) providing valuable guidance and support.
  • Thanks to Yanni for his valuable inputs during the development.

Contact

Contact Ankur Verma through -

Email : ankur at laptop org

IRC : ankur on #olpc #sugar