Disassembly backlight: Difference between revisions

From OLPC
Jump to navigation Jump to search
(New page: {{TOCright}} This is a description of how to disassemble the display of an XO laptop to replace the backlight. This is part of the Disassembly section of the [[XO_Troubleshooting_Gui...)
 
No edit summary
Line 1: Line 1:
{{TOCright}}
{{TOCright}}


This is a description of how to disassemble the display of an XO laptop to replace the backlight. This is part of the [[Disassembly]] section of the [[XO_Troubleshooting_Guide|Troubleshooting Guide]] and [[Repair|Repair Manual]].
This is a description of how to disassemble the display of an [[Hardware|XO laptop]] to replace the backlight. This is part of the [[Disassembly]] section of the [[XO_Troubleshooting_Guide|Troubleshooting Guide]] and [[Repair|Repair Manual]].


== Removing the backlight ==
== Removing the backlight ==

Revision as of 04:03, 10 June 2008

This is a description of how to disassemble the display of an XO laptop to replace the backlight. This is part of the Disassembly section of the Troubleshooting Guide and Repair Manual.

Removing the backlight

Step 1

Remove tape from backlight connection cable to expose the back of the display.

Peel off tape
Remember tape on the sides, too!


Step 2

Disconnect the backlight from the display by removing the two screws shown below using a #0 Philips head screwdriver.

Take out two screws where indicated
Lift the backlight up and out.
Separated backlight