XS Server Installation

This is a rough guide for installing an XS school server for a small school. This is by no means a complete guide to installing all things server-related so please feel free to add to this document.

Recommended School Server Specifications

A number of computers may act as a school server, but it must be a Fedora-capable computer. Recommended minimum specifications for a school server are as follows:

Server	Laptops Supported	Processor	RAM	Storage
Small	<20-25	466 MHz	256 MB	40-60 GB
Large	<150	1 GHz	1 GB	320-400 GB

Set Access Point

The steps for setting up a wireless router access point vary based on the wireless router being using, but this serves as a rough guide for installation. These steps were run using a Zoom Wireless-G model 4400 router.

• Press the reset button on the wireless router to reset it and connect it to any computer. It's possible to do this setup with an XO or any other machine with linux installed.
• Open terminal and type

ifconfig eth0 IPaddress

Where IPaddress is default IP for the access point

• Connect to the access point by typing in the IP address in a web browser.
• Login to the access point using the default password (or skip entering a password if none is provided)
• Set the wireless channel to 1, 6 or 11 to minimize interference
• Set a unique name for the network
• Make sure that the access point is NOT running as a DHCP server

Obtaining Server Software

Downloading the System Image [[1]]

You can obtain the latest image from http://xs-dev.laptop.org/xs/:

wget http://xs-dev.laptop.org/xs/OLPC_XS_LATEST.iso

This can be copied onto a CD or DVD using your favorite software.

It may also be copied onto a USB key, using the livecd-tools provided by Fedora 7:

livecd-iso-to-disk OLPC_XS_LATEST.iso /dev/sdb1

where /dev/sdb1 represents the USB key being copied onto.

There is a git repository for livecd-tools if you need a different version of the script, or are on a different linux distro.