Clean-install procedure for 8.2: Difference between revisions

From OLPC
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 4: Line 4:
[[Image:Power-button.jpg|thumb|right|Power & Game buttons for B2 and older XOs. B3 and newer have "O" at the top and "✓" (check) at the right.]]
[[Image:Power-button.jpg|thumb|right|Power & Game buttons for B2 and older XOs. B3 and newer have "O" at the top and "✓" (check) at the right.]]


⚫
# Download the OS image and its signatures file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
# Install.
⚫
#* Official OS images can be downloaded from [http://download.laptop.org/xo-1/os/official/], [http://download.laptop.org/xo-1/os/candidate/], and ''sometimes'' from [[http://download.laptop.org/xo-1/os/custom/]].
⚫
#* Download the OS image and its signatures file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
⚫
# Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named something like: en708-1.img and fs.zip.
⚫
#** Official OS images can be downloaded from [http://download.laptop.org/xo-1/os/official/], [http://download.laptop.org/xo-1/os/candidate/], and ''sometimes'' from [[http://download.laptop.org/xo-1/os/custom/]].
⚫
# Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
⚫
#* Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named something like: en708-1.img and fs.zip.
⚫
# Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the four game keys. (this is VERY important!)
⚫
#* Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
⚫
# Release game keys when it asks you to. It will take a few minutes to rewrite the memory.
⚫
#* Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the four game keys. (this is VERY important!)
⚫
#* Release game keys when it asks you to. It will take a few minutes to rewrite the memory.
# Reboot.
# Reboot.
# Check that you have the correct build:
# Check that you have the correct build:
Line 19: Line 18:
{{developers}}
{{developers}}


#* Get a [[Developer key#Getting a Developer Key for your Running XO Laptop|developer key]] for your XO laptop.
# Get a [[Developer key#Getting a Developer Key for your Running XO Laptop|developer key]] for your XO laptop.
#* Download the OS image and its CRC file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
# Download the OS image and its CRC file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
#* Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named: for example, os708.img and os708.crc.
# Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named: for example, os708.img and os708.crc.
#* Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
# Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
#* Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the escape key (the circled "x" in the upper left corner of the keyboard).
# Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the escape key (the circled "x" in the upper left corner of the keyboard).
#* Release the 'x' key when it asks you to. You should be at the [[Firmware|OpenFirmware]] "ok" prompt.
# Release the 'x' key when it asks you to. You should be at the [[Firmware|OpenFirmware]] "ok" prompt.
#* Assuming that your disk image is named _____.img, type <tt>copy-nand u:\____.img</tt> and press Enter.
# Assuming that your disk image is named _____.img, type
copy-nand u:\____.img
#* Wait while your machine reflashes.
#* When the "ok" prompt returns, reboot the machine.
# Press Enter, then wait while your machine reflashes.
# When the "ok" prompt returns, reboot the machine.

Revision as of 20:34, 31 July 2008

Official and Candidate Builds

Template:Public

Power & Game buttons for B2 and older XOs. B3 and newer have "O" at the top and "✓" (check) at the right.
  1. Download the OS image and its signatures file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
    • Official OS images can be downloaded from [1], [2], and sometimes from [[3]].
  2. Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named something like: en708-1.img and fs.zip.
  3. Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
  4. Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the four game keys. (this is VERY important!)
  5. Release game keys when it asks you to. It will take a few minutes to rewrite the memory.
  6. Reboot.
  7. Check that you have the correct build:
    • Hover over the XO in the Home screen and click on 'About my XO'
    • Check that the build number matches build number of the image file you downloaded, e.g. 'Update.1 708, firmware Q2D16' for en708-1.

Development Builds

  For Developers
  1. Get a developer key for your XO laptop.
  2. Download the OS image and its CRC file to your local computer. DO NOT open them. P.S. If your computer runs on MS Windows, point your cursor on the link, click the right mouse button and choose "Save Link Target As".
  3. Copy these files onto of a clean (Full (not Quick!) formatted) USB memory stick. Your USB memory stick should now contain two files named: for example, os708.img and os708.crc.
  4. Unmount the USB memory stick and disconnect it from your computer when it is safe to do so.
  5. Shut down your XO laptop. Insert the USB stick into the XO Laptop and power up while holding the escape key (the circled "x" in the upper left corner of the keyboard).
  6. Release the 'x' key when it asks you to. You should be at the OpenFirmware "ok" prompt.
  7. Assuming that your disk image is named _____.img, type
 copy-nand u:\____.img
  1. Press Enter, then wait while your machine reflashes.
  2. When the "ok" prompt returns, reboot the machine.
Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Clean-install_procedure_for_8.2&oldid=148754"