Tests/SmokeTest/Distance: Difference between revisions

Revision as of 19:55, 5 November 2008

Stream	,\|x\|Build stream::x}}
Category	Test category::SmokeTest	Sub-category	Test subcategory::Distance
Component	System component::
Feature	System feature::
Objective	Test objective::Get 2 XOs running the distance activity
Tools	Test tools::2 XO units
Setup	Test setup::
Procedure	[[Test procedure::Actions On both XO's click on the same network (whatever is available) in each of their mesh views; confirm they are both connected Open Distance with one XO Share the activity with the neighborhood Go to the Mesh view of that XO Go to the Mesh view of the second XO In the mesh view of the second XO click on the distance activity that the first one just shared On the first XO press the check key on the game pad to start measuring the distance Close the Distance activity Follow the same steps, but starting with the second XO (see that it works both ways)]]
Expected Results and Pass Criteria	[[Pass criteria::Verify The shared Distance activity shows up in the mesh view of both laptops The tiny circle with a check on the screen of both XOs should turn green The first XO should make sounds after the check key is pressed Both XOs should show the distance between each other on the screen Distance works both ways]]
Comments	More notes::

Release	Stream	Build	Pass/Fail	Trac Ticket(s)	Comment(s)	Date of Test
Software release::Candidate	Build stream::8.2	Build number::760	PassFail::Pass	,\|x\| #x}}	Comments::	Created::
Software release::Candidate	Build stream::8.2	Build number::762	PassFail::Pass	,\|x\| #x}}	Comments::	Created::
Software release::Candidate	Build stream::8.2	Build number::766	PassFail::Pass	,\|x\| #x}}	Comments::Signed upgrade, fine both ways.	Created::
Software release::Candidate	Build stream::8.2	Build number::766	PassFail::Pass	,\|x\| #x}}	Comments::olpc-upgrade candidate-766 lookin' good!	Created::
Software release::Candidate	Build stream::8.2	Build number::767	PassFail::Pass	,\|x\| #x}}	Comments::used an XO that was usb upgraded from 656 to 767 and an XO clean installed with 767. worked great on mesh channel 11	Created::
Software release::Candidate	Build stream::8.2	Build number::767	PassFail::Pass	,\|x\| #x}}	Comments::using two copy-nand clean installed gg-767-4 machines on channel 6, worked great.	Created::
Software release::8.2.0 (767)	Build stream::8.2	Build number::767	PassFail::Pass	,\|x\| #x}}	Comments::smoke testing new firmware q2e21, activity worked on both mesh11 and ml1cc.	Created::2008/11/05

@@ Line 63: / Line 63: @@
 |testresult_passfail=Pass
 |testresult_comments=using two copy-nand clean installed gg-767-4 machines on channel 6, worked great.
+}}
+{{Test results
+|testresult_release=8.2.0 (767)
+|testresult_stream=8.2
+|testresult_build=767
+|testresult_passfail=Pass
+|testresult_comments=smoke testing new firmware q2e21, activity worked on both mesh11 and ml1cc.
+|testresult_date=2008/11/05
 }}
 {{Test results end}}