OLPC Firmware q3a63/Test plan: Difference between revisions
Jump to navigation
Jump to search
(Created page with '* verify ''machine-signature'' value is CL1 , * verify ''flash'' XO-1.75 firmware is prevented, * check that ''pong'' remains playable, * check output from ''.mppt'' is rational,…') |
No edit summary |
||
| Line 1: | Line 1: | ||
* verify ''machine-signature'' value is CL1 , |
* verify ''machine-signature'' value is CL1 , |
||
** check, |
|||
* verify ''flash'' XO-1.75 firmware is prevented, |
* verify ''flash'' XO-1.75 firmware is prevented, |
||
** check, |
|||
* check that ''pong'' remains playable, |
* check that ''pong'' remains playable, |
||
** check, |
|||
* check output from ''.mppt'' is rational, |
* check output from ''.mppt'' is rational, |
||
** check, |
|||
* try the new ''bat-recover'', |
* try the new ''bat-recover'', |
||
** deferred, |
|||
* test USB hot plug behind hub, -r2152, |
* test USB hot plug behind hub, -r2152, |
||
** with no USB devices attached, boot to ok prompt, type ''dir u:'', expected response is ''Can't open directory'', |
|||
** with a USB device attached, boot to ok prompt, type ''dir u:'', expected response is directory contents, |
|||
** with no USB devices attached, boot to ok prompt, type ''dir u:'', expected response is ''Can't open directory'', insert a USB drive directly into a port, type ''dir u:'', expected response is directory contents, |
|||
** with only a USB hub attached, boot to ok prompt, type ''dir u:'', expected response is ''Can't open directory'', insert a USB drive into the hub, type ''dir u:'', expected response is directory contents, |
|||
** on Q3A62, repeat above test, response was ''Can't open directory''. |
|||
** check, |
|||
* test USB overcurrent response, on ports and via hub, -r2155, |
* test USB overcurrent response, on ports and via hub, -r2155, |
||
* check that internal microSD and external SD can be read repeatedly, |
* check that internal microSD and external SD can be read repeatedly, |
||
Revision as of 04:59, 14 April 2011
- verify machine-signature value is CL1 ,
- check,
- verify flash XO-1.75 firmware is prevented,
- check,
- check that pong remains playable,
- check,
- check output from .mppt is rational,
- check,
- try the new bat-recover,
- deferred,
- test USB hot plug behind hub, -r2152,
- with no USB devices attached, boot to ok prompt, type dir u:, expected response is Can't open directory,
- with a USB device attached, boot to ok prompt, type dir u:, expected response is directory contents,
- with no USB devices attached, boot to ok prompt, type dir u:, expected response is Can't open directory, insert a USB drive directly into a port, type dir u:, expected response is directory contents,
- with only a USB hub attached, boot to ok prompt, type dir u:, expected response is Can't open directory, insert a USB drive into the hub, type dir u:, expected response is directory contents,
- on Q3A62, repeat above test, response was Can't open directory.
- check,
- test USB overcurrent response, on ports and via hub, -r2155,
- check that internal microSD and external SD can be read repeatedly,
- check that Linux kernel shows new device tree entries, -r2175,
- write code that uses new feature $case .