OLPC Firmware q3a63/Test plan: Difference between revisions

Revision as of 05:12, 14 April 2011

verify machine-signature value is CL1 ,
- check,
verify flash XO-1.75 firmware is prevented,
- check,
check that pong remains playable,
- check,
check output from .mppt is rational,
- check,
try the new bat-recover,
- deferred,
test USB hot plug behind hub, -r2152,
- with no USB devices attached, boot to ok prompt, type dir u:, expected response is Can't open directory,
- with a USB device attached, boot to ok prompt, type dir u:, expected response is directory contents,
- with no USB devices attached, boot to ok prompt, type dir u:, expected response is Can't open directory, insert a USB drive directly into a port, type dir u:, expected response is directory contents,
- with only a USB hub attached, boot to ok prompt, type dir u:, expected response is Can't open directory, insert a USB drive into the hub, type dir u:, expected response is directory contents,
- on Q3A62, repeat above test, response was Can't open directory.
- check,
test USB overcurrent response, on ports and via hub, -r2155,
- using shorting plug on host port, all ports go unpowered, no error message,
- using shorting plug on hub port, hub indicator goes out, no error message,
- fail, or a failure to understand,
check that internal microSD and external SD can be read repeatedly,
- dir int:\security many,
- check,
check that Linux kernel shows new device tree entries, -r2175,
write code that uses new feature $case .

@@ Line 17: / Line 17: @@
 ** check,
 * test USB overcurrent response, on ports and via hub, -r2155,
+** using shorting plug on host port, all ports go unpowered, no error message,
+** using shorting plug on hub port, hub indicator goes out, no error message,
+** fail, or a failure to understand,
 * check that internal microSD and external SD can be read repeatedly,
+** ''dir int:\security many'',
+** check,
 * check that Linux kernel shows new device tree entries, -r2175,
 * write code that uses new feature ''$case'' .