OLPC Firmware q7a13: Difference between revisions

Revision as of 23:41, 6 September 2012

NOTE: The contents of this page are not set in stone, and are subject to change!

This page is a draft in active flux ...
Please leave suggestions on the talk page.

This page is monitored by the OLPC team.

Works on XO-4 A2 only. Do not use on A1. Aiming for B1 build.

correct the interrupt routing for the camera controller, (<trac>12090</trac>).
suppress image size smaller than disk size now that builds size themselves to available space,
undo change to firmware upgrade version check, (<trac>12079</trac>), <trac>12091</trac>),
graphical touchscreen tests for signal analysis, double randomness of adjacent axis test, fix boxes test; many boxes could not be cleared, flush events and ignore buffered up events; to avoid old data on scribble and adjacent axis test, fix bug in watch-fss; was occasionally aborting due to touch event data seen in stream, adjacent axis tests; increase box array to cover used size for photodiode edges, remove debugging. XO_4_Touch_Testing,

treat delete key as backspace, for compatibility with Linux terminals attached to serial console,
turn off the storage indicator during suspend.

@@ Line 33: / Line 33: @@
 * suppress image size smaller than disk size now that builds size themselves to available space,
 * undo change to firmware upgrade version check, (<trac>12079</trac>), <trac>12091</trac>),
+* graphical touchscreen tests for signal analysis, double randomness of adjacent axis test, fix boxes test; many boxes could not be cleared, flush events and ignore buffered up events; to avoid old data on scribble and adjacent axis test, fix bug in watch-fss; was occasionally aborting due to touch event data seen in stream, adjacent axis tests; increase box array to cover used size for photodiode edges, remove debugging. [[XO_4_Touch_Testing]],
-* graphical touchscreen tests for signal analysis, [[XO_4_Touch_Testing]],
 === CForth ===