XS Community Edition/0.3/Installing: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
Line 12: Line 12:
<li>Ensure USB Ethernet Adapters are connected.
<li>Ensure USB Ethernet Adapters are connected.
<li>Launch Terminal Activity (unhide Terminal if necessary, clicking List View in the top right of Home View).
<li>Launch Terminal Activity (unhide Terminal if necessary, clicking List View in the top right of Home View).
<Li>Change to user root by typing "su".
<li>Go to 'my neighborhood' and connect to internet.
<li>Change to user root by typing "su".
<li>Make sure the date and time are set correctly. If not set it manually using "date mmddhhmmyyyy" where mm=month, dd=day, hh=hour, mm=minute, yyyy=year. This is required for yum to work correctly.
<li>Make sure the date and time are set correctly. If not set it manually using "date mmddhhmmyyyy" where mm=month, dd=day, hh=hour, mm=minute, yyyy=year. This is required for yum to work correctly.
<li>Change directory by typing "cd /etc/yum.repos.d"
<li>Change directory by typing "cd /etc/yum.repos.d"

Revision as of 01:17, 11 May 2013

Prereqs

This recipe installs XS Community Edition on an XO running OLPC OS 13.1.0 (http://wiki.laptop.org/go/Release_notes/13.1.0) with power management turned off within My Settings | Power.

During the install process, your XS server must be connected to the Internet, via its built-in Wifi adapter/ears (it may NOT connect to the Internet thru a USB Ethernet Adapter during your install). After the install process, your XS server may connect to the Internet using others mean.

Also required is a USB Ethernet Adapter connected to a separate Wifi access point (call it AP-LAN) so kids' XOs can later connect their XOs to the server.

Repeat any of the download steps below if they fail due to Internet/DNS glitches.

Installing

  1. Ensure USB Ethernet Adapters are connected.
  2. Launch Terminal Activity (unhide Terminal if necessary, clicking List View in the top right of Home View).
  3. Go to 'my neighborhood' and connect to internet.
  4. Change to user root by typing "su".
  5. Make sure the date and time are set correctly. If not set it manually using "date mmddhhmmyyyy" where mm=month, dd=day, hh=hour, mm=minute, yyyy=year. This is required for yum to work correctly.
  6. Change directory by typing "cd /etc/yum.repos.d"
  7. Download the needed yum repo by typing "wget http://build.activitycentral.com/xsce.repo".
  8. Install xs-config-xo by typing "yum -y install xs-config-xo" (downloads 17+ MB).
  9. Type "bootstrap-xo" (downloads 34+ MB).
  10. Press [Enter] to reboot.
  11. Launch Terminal Activity.
  12. Change to user root by typing "su".
  13. Type the command "xs-setup" . This generates a long list of "yum" install requests, similar to the normal adding of functions that you would do if you loaded a minimal "network" install CD from Fedora, and then added additional functions one at a time. (downloads 200+ MB)
  14. "INSERT USB ETHERNET ADAPTER NOW" warning will appear. Insert it as instructed.
    Type "y" to continue. 40+ minutes later, your XS should return to a root prompt with the message "XS configured; services are ready to use." (downloads about 200 MB !)
  15. Remove any USB Ethernet Adapter
  16. Reboot.
  17. Re-insert USB Ethernet Adapter.