XO 4 Certifications: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
Line 45: Line 45:
*[[Media:XO-4_CE_SAR.pdf|CE/ACMA SAR Testing]]
*[[Media:XO-4_CE_SAR.pdf|CE/ACMA SAR Testing]]
*[[Media:XO-4_CTick_Q_EMC.pdf|C-Tick EMC Report]] (Quanta testing)
*[[Media:XO-4_CTick_Q_EMC.pdf|C-Tick EMC Report]] (Quanta testing)

=Robustness=
A hardware testing specification is used to certify that the laptop has acceptable robustness. The manufacturer, Quanta, certifies that samples of the laptop pass this specification. The XO-4 Touch introduced a new set of testing specifications, based on the one used for [[XO-1]], [[XO-1.5]], and [[XO-1.75]].

*[[Media:XO-4_Test_Spec.xls|Hardware Test Specification]]

==Battery Test Data==
*[[Media:shortcircuit.xls |short circuit]]
*[[Media:stovetest.xls |stove test (150C)]]
*[[Media:crushtest.xls |crush test]]
*[[Media:nailtest.xls |nail test (drive a nail through the battery)]]
*[[Media:overcharge.xls |overcharging test]]

==AC Adapter==
*[[Media:XO-1.5_Adapter_Spec.pdf|Adapter Specification]]
*90v(-10%) ~ 240v(+25%), 35-60Hz, AC input
*Safety: IEC 60950-1, EN 60950-1 & CSA/UL 60950-1 qualified
*Extra Transient and Burst Immunity: IEC 61000-4-4 passed
*Extra Surge Immunity: IEC 61000-4-5 passed

=Quality Control=
The Quanta factory meets [http://en.wikipedia.org/wiki/ISO_9000 ISO 9001] standards: [[Media:ISO9001.pdf |QSMC F6 ISO 9001 Certificate]]


[[Category:Hardware]]
[[Category:Hardware]]

Revision as of 16:01, 10 September 2013

  This page is monitored by the OLPC team.

This page contains safety and RF emission test reports and certifications for the XO-4 Laptop.

Safety

The XO-4 Laptop has the following Safety certifications:

EMC Test Reports

The testing strategy is to ensure compliance with both EU and FCC RF and EMI regulations. Most other countries in the world either accept the results of this testing for certification or have similar tests which can be passed if the EU/FCC standards are met.

CE/EU Certifications

FCC/US Certifications

International Certifications

Australian Certifications

Robustness

A hardware testing specification is used to certify that the laptop has acceptable robustness. The manufacturer, Quanta, certifies that samples of the laptop pass this specification. The XO-4 Touch introduced a new set of testing specifications, based on the one used for XO-1, XO-1.5, and XO-1.75.

Battery Test Data

AC Adapter

  • Adapter Specification
  • 90v(-10%) ~ 240v(+25%), 35-60Hz, AC input
  • Safety: IEC 60950-1, EN 60950-1 & CSA/UL 60950-1 qualified
  • Extra Transient and Burst Immunity: IEC 61000-4-4 passed
  • Extra Surge Immunity: IEC 61000-4-5 passed

Quality Control

The Quanta factory meets ISO 9001 standards: QSMC F6 ISO 9001 Certificate