Installing Debian as an upgrade: Difference between revisions
RafaelOrtiz (talk | contribs) m (+cat) |
(Update paths; add more complete info.) |
||
Line 3: | Line 3: | ||
Secondly, you must have enabled the upgradable stuff; at the moment this is done by booting with 'upgrade' on the kernel command line. Deep magic here; it will become less magic in the future. |
Secondly, you must have enabled the upgradable stuff; at the moment this is done by booting with 'upgrade' on the kernel command line. Deep magic here; it will become less magic in the future. |
||
Now, boot into sugar. You are currently running from the system in /run/a, and /run/b contains a mirror image of this. We're going to replace /run/b with debian. |
Now, boot into sugar. You are currently running from the system in /versions/run/a, and /versions/run/b contains a mirror image of this. We're going to replace /versions/run/b with debian. |
||
Step 1: |
==Step 1: Create debian bootstrap== |
||
From an existing debian system, as root (fakeroot won't work, sadly): |
|||
# apt-get install debootstrap |
# apt-get install debootstrap |
||
# mkdir mnt |
# mkdir mnt |
||
# debootstrap etch mnt http://http.us.debian.org/debian/ |
# debootstrap --include=udev,wireless-tools etch mnt http://http.us.debian.org/debian/ |
||
Wait awhile. Eventually, you'll have a complete debian bootstrap system in mnt. |
Wait awhile. Eventually, you'll have a complete debian bootstrap system in mnt. |
||
Line 17: | Line 18: | ||
Put xo-debian.tgz on a usb key. |
Put xo-debian.tgz on a usb key. |
||
==Step 2: Install debian bootstrap== |
|||
From the XO, log in as root on console. Insert usb key. |
|||
# cd /run |
# cd /run |
||
# /bin/rm -rf b ; mkdir b ; cd b |
# /bin/rm -rf b ; mkdir b ; cd b |
||
# tar xzf /media/*/xo-debian.tgz |
# tar xzf /media/*/xo-debian.tgz |
||
⚫ | |||
⚫ | |||
# cp -r /lib/modules/* /versions/run/b/lib/modules |
|||
# cp -r /lib/firmware /versions/run/b/lib |
|||
# mkdir /versions/run/b/var/cache/apt/cache |
|||
⚫ | |||
Step 3: configuration. |
|||
:Note: to get around the apt-get jffs2/mmap [http://lists.debian.org/debian-handheld/2003/03/msg00000.html issue], I added the following line to /versions/run/b/etc/fstab: |
|||
tmpfs /var/cache/apt/cache tmpfs defaults 0 0 |
|||
:and created /versions/run/b/etc/apt/apt.conf.d/00-tmpfs-cache with: |
|||
Dir { |
|||
Cache "var/cache/apt/" { |
|||
srcpkgcache "cache/srcpkgcache.bin"; |
|||
pkgcache "cache/pkgcache.bin"; |
|||
}; |
|||
}; |
|||
:Not exactly ideal, but it works for me. It will take apt a little while to rebuild the cache after you reboot, of course. I think you could achieve persistence by copying the files to/from the tmpfs either in startup/shutdown scripts, or maybe pre-/post-invocation hooks in apt (which might have the added benefit of being able to mount/unmount the tmpfs on demand). |
|||
==Step 3: Boot into Debian!== |
|||
You need to setup the following files: /etc/hosts, /etc/fstab: |
|||
⚫ | |||
⚫ | |||
Shutdown your XO. As documented at [[Cheat codes]], reboot while holding down the 'O' key to switch to the alternate OS (debian!). Reboot again with 'O' pressed down to switch back later. |
|||
⚫ | |||
Step 4: |
==Step 4: Start networking== |
||
Just use ifconfig if you've got a supported wired ethernet adapter. To connect to an access point: |
|||
'''To be continued''' |
|||
# modprobe usb8xxx |
|||
# iwconfig eth0 essid <your-access-point> |
|||
# dhclient eth0 |
|||
==Step 5: Install fun stuff== |
|||
For example: |
|||
# apt-get update |
|||
# aptitude install emacs |
|||
[[category:software]] |
[[category:software]] |
Revision as of 17:23, 30 August 2007
These instructions assume you are starting from build 559 or later, which has support for booting from multiple images.
Secondly, you must have enabled the upgradable stuff; at the moment this is done by booting with 'upgrade' on the kernel command line. Deep magic here; it will become less magic in the future.
Now, boot into sugar. You are currently running from the system in /versions/run/a, and /versions/run/b contains a mirror image of this. We're going to replace /versions/run/b with debian.
Step 1: Create debian bootstrap
From an existing debian system, as root (fakeroot won't work, sadly):
# apt-get install debootstrap # mkdir mnt # debootstrap --include=udev,wireless-tools etch mnt http://http.us.debian.org/debian/
Wait awhile. Eventually, you'll have a complete debian bootstrap system in mnt.
# tar -C mnt -czf xo-debian.tgz . # /bin/rm -rf mnt
Put xo-debian.tgz on a usb key.
Step 2: Install debian bootstrap
From the XO, log in as root on console. Insert usb key.
# cd /run # /bin/rm -rf b ; mkdir b ; cd b # tar xzf /media/*/xo-debian.tgz # cp /etc/hosts /versions/run/b/etc/hosts # cp /etc/fstab /versions/run/b/etc/fstab # cp -r /lib/modules/* /versions/run/b/lib/modules # cp -r /lib/firmware /versions/run/b/lib # mkdir /versions/run/b/var/cache/apt/cache
You also need to use the fix at [1] to make apt work. Quoted below, with some edits and paths adjusted appropriately:
- Note: to get around the apt-get jffs2/mmap issue, I added the following line to /versions/run/b/etc/fstab:
tmpfs /var/cache/apt/cache tmpfs defaults 0 0
- and created /versions/run/b/etc/apt/apt.conf.d/00-tmpfs-cache with:
Dir { Cache "var/cache/apt/" { srcpkgcache "cache/srcpkgcache.bin"; pkgcache "cache/pkgcache.bin"; }; };
- Not exactly ideal, but it works for me. It will take apt a little while to rebuild the cache after you reboot, of course. I think you could achieve persistence by copying the files to/from the tmpfs either in startup/shutdown scripts, or maybe pre-/post-invocation hooks in apt (which might have the added benefit of being able to mount/unmount the tmpfs on demand).
Step 3: Boot into Debian!
Shutdown your XO. As documented at Cheat codes, reboot while holding down the 'O' key to switch to the alternate OS (debian!). Reboot again with 'O' pressed down to switch back later.
Step 4: Start networking
Just use ifconfig if you've got a supported wired ethernet adapter. To connect to an access point:
# modprobe usb8xxx # iwconfig eth0 essid <your-access-point> # dhclient eth0
Step 5: Install fun stuff
For example:
# apt-get update # aptitude install emacs