Theft deterrence protocol

NOTE: The contents of this page are not set in stone, and are subject to change! This page is a draft in active flux ... Please leave suggestions on the talk page.

This is a basic antitheft client/server protocol for FRS. It is expected that this protocol is temporary to a degree: we expect to have a more featureful management system at some point in the future. The primary goal of this protocol is to deploy something "good enough for now" that will allow us to upgrade to a revised featureful protocol at a later date, with the benefit of some experience with the upgrade system. At various points in the discussion below, we will flag features which are expected to be deprecated, replaced, or fleshed out later.

Antitheft client request

The antitheft client (OATC) will send periodically send requests to the canonical antitheft server. It is recommended that OATC send a request if (antitheft lease expiration time + time of last request) / 2 is earlier than the current time. This guarantees an server outage must last longer than (lease time / 2) in order to effect clients.

The client requests and responses are standard HTTP/1.1 in order to allow them to pass unmolested through the greatest varienty of (stateful) firewalls, NATs, and proxies.

The client request is:

POST /antitheft/1 HTTP/1.1
Host: antitheft.laptop.org
Authorization: OLPC-hashcash <hashcash>
Content-Type: application/x-www-form-urlencoded  

<form contents>

As should be obvious from the request, it is made to the URL http://antitheft.laptop.org/antitheft/1. The number at the end of the URL is a version string; later versions of this protocol will use a different suffix. The 'Authorization' line is optional, but may trigger a 401 response if omitted. The response will have the following form.

 HTTP/1.1 401 Hashcash required.
 WWW-Authenticate: <oatc-bits> <oatc-nonce>

The authorization line mitigates DoS attacks. The '<hashcash>' element should be a version 1 hashcash stamp with the resource string equal to <oatc-nonce> and the bits field greater than or equal to <oatc-bits>.

If required, the hashcash should be checked before the form contents are accepted. A limited-size buffer may be used for the first recv on the stream to enforce this, so extra headers (or re-ordered headers) should be avoided.

The form contents are encoded according to their content type. The fields are:

serialnum

the serial number of the laptop

version

the URI identifying the currently-running version on the laptop (or hash?)

stream

an opaque string identifying the "upgrade stream" to which the user has subscribed themself. Note that future upgrade servers may ignore this field in favor of central management

nonce

an opaque string randomly generated by the client so as to be highly likely unique

delegated

an optional hint -- see the delegation response for more information

Antitheft server response

The response status code should be 200 if the response is accepted or 401 if the hashcash authentication failed.

Response format:

HTTP/1.1 200 OK
Content-Type: text/x-json

<reponse body>

The reponse body is a Canonical JSON envelope with type 'oatc-signed-resp' and version 1. The body is a tuple:

(data, credential)

where the signature field is a credential on the data field, signed with the "antitheft server" key. This key validates this response as coming from a trusted antitheft server; it is not the same as the antitheft lease key, upgrade signing key, or kernel signing key.

The 'data' field in the 'oatc-signed-resp' object is another Canonical JSON envelope with type 'oatc-resp' and version 1. The body is a map with the following keys and data:

nonce

value nonce-data

the nonce-data must match the nonce provided in the request exactly.

stolen

hash

the stolen field, if present, contains a ascii hexadecimal-encoded sha256 hash. The hash is either of the string "<uuid>:<nonce>" or of "<uuid>:<nonce>:STOLEN".

upgrade

value (hash, priority, hint)

the hash identifies the new version to which we should upgrade

the priority is a string. if it has the contents "urgent" we should reboot immediately after receiving this upgrade, because it has critical security implications. Other contents are ignored.

the hint is a map from strings to strings. The keys identify various upgrade mechanisms, and the values give a hint as to where that upgrade mechanism can find the upgrade identified by the hash. For example:

{ 'schoolserver-rsync': 'rsync://schoolserver/build-589',
  'fallback-rsync': 'rsync://updates.laptop.org/build-589',
  'fallback-tarball': 'http://olpc.download.redhat.org/.../build-589/devel_jffs/' }

the hints map thus implicitly provides a mapping from version hashes to human-readable build strings, allows us to centrally control the sources of the update (disabling certain upgrade mechanisms, using local mirrors, etc), and is extensible to provide guidance to future download mechanisms.

delegate

value (url, key_or_fingerprint)

the url identifies another antitheft server at which we should repeat our request.

if the 'delegated' field in the response was present, the key_or_fingerprint field will be a short opaque fingerprint corresponding to a key which the client is already expected to have.

if the 'delegated' field in the response was absent, the key_or_fingerprint field will be a key object identifying the public key with which the delegated server is expected to sign its responses.

public keys are large objects; the 'delegated' hint tries to avoid sending them when unnecessary. If the delegation key changes and the client finds that it doesn't in fact have a key matching the sent fingerprint, it must retry the request to the original server with the 'delegated' hint absent.

lease

value lease-data

the lease-data is an activation lease in the firmware activation lease format.

The only mandatory field in the response is 'nonce', which prevents replay attacks. If the 'lease' field is absent, then the server does not have a newer activation lease to give to the client. If the 'delegate' field is absent, then the response of this server is authoritative. If the 'upgrade' field is absent, the server judges the client's software version adequate for the time being. The options are not exclusive -- for example, the response might have both 'lease' and 'delegate' set if it wanted to delegate upgrade management to another server, or 'upgrade' and 'delegate' set if it wanted to delegate lease management.

It is recommended that any server which returns some entries with the 'stolen' field return *all* entries with the 'stolen' field, to prevent network filtering of messages with 'stolen' set. The fixed size hash used as the payload is intended to prevent filtering from being able to distinguish between normal responses and responses indicating a stolen laptop. Care should be taken to ensure that these cases can not be easily distinguished by the presence or contents of other fields in the message. For a stateless upgrade server, the 'stolen' field can be safely omitted.

OATC/Rainbow protocol

There are two files in /security which rainbow/userland uses to communicate with the antitheft client (oatc):

/security/update-stream
/security/update-version

The 'update-stream' file contains the string which is to be included in the 'stream' field of the antitheft request. The 'update-version' file contains the string which is to be included in the 'version' field of the antitheft request.

There is an additional unix datagram socket in

/security/events

which is used to communicate between rainbow and oatc. A datagram is sent from oatc to rainbow with the json-encoded 'oatc-resp' object whenever an antitheft response is received. A short timeout on the send prevents userland from hanging oatc. The contents are parsed and used to trigger upgrades.

Userland may also send blackbox data via this socket to oatc; this is left unspecified (and unimplemented) at the present.