Tests/SmokeTest/StartUp: Difference between revisions
< Tests
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|testcase_stream=Any |
|testcase_stream=Any |
||
|testcase_component=boot up features |
|testcase_component=boot up features |
||
|testcase_objective=Boot up your XO unit |
|testcase_objective=Boot up your XO unit in secure and/or non secure mode. You can only boot in secure mode if you are testing a signed release. |
||
|testcase_tools=XO unit |
|testcase_tools=XO unit |
||
|testcase_procedure=''Actions'' |
|testcase_procedure=''Actions'' |
||
# Boot the laptop |
# Boot the laptop in non-secure mode |
||
# You should see linux text during boot |
|||
# Connect to a school server AP (such as xstest), WEP ("canopy"/ASCii pswrd:'xoxoxoxoxoxox') and WPA ("olpc" pswrd:'xoxoxoxo') access points |
|||
# Ensure that sugar is running (you get the home screen or the name screen) |
|||
# If necessary (due to cleaninstall), add a name and choose a color. |
|||
# If you have a signed build, secure the laptop, then boot the laptop in secure mode. |
|||
# Ensure that you see pretty boot during boot up. |
|||
# Ensure that sugar boots all the way to the home screen or the name screen. |
|||
# If necessary (due cleaninstall), add a name and choose a color. |
|||
|testcase_expectedresults=''Verify'' |
|testcase_expectedresults=''Verify'' |
||
* |
* In non-secure mode: the laptop shows linux text during boot up. |
||
* You can see activities, journal, etc. |
|||
* If in secure mode: the laptop shows pretty boot (only with signed builds) |
|||
* The laptop boots into sugar |
* The laptop boots into sugar |
||
* The journal loads |
* The journal loads |
||
* The laptop connects to one of the following (whichever one is highest on the list and available to the laptop) |
|||
** A school server - ''If there is a school server present, the laptop MUST be tested against the school server. If it cannot connect to the school server, that is a major failure.'' |
|||
** A preferred AP |
|||
** An MPP |
|||
** A local mesh |
|||
* The XO should connect properly to a WEP or WPA enabled AP |
|||
}} |
}} |
||
{{Test results begin}} |
{{Test results begin}} |
||
Revision as of 22:30, 30 September 2008
Test case: Short name::Start Up
How to report results
| Stream | ,|x|Build stream::x}} | ||
|---|---|---|---|
| Category | Test category::SmokeTest | Sub-category | Test subcategory::Start Up |
| Component | System component::boot up features | ||
| Feature | System feature:: | ||
| Objective | Test objective::Boot up your XO unit in secure and/or non secure mode. You can only boot in secure mode if you are testing a signed release. | ||
| Tools | Test tools::XO unit | ||
| Setup | Test setup:: | ||
| Procedure | [[Test procedure::Actions
| ||
| Expected Results and Pass Criteria |
[[Pass criteria::Verify
| ||
| Comments | More notes:: | ||
| Release | Stream | Build | Pass/Fail | Trac Ticket(s) | Comment(s) | Date of Test |
|---|---|---|---|---|---|---|
| Software release::Candidate | Build stream::8.2 | Build number::760 | PassFail::Pass | ,|x| #x}} | Comments:: | Created::
|
| Software release::Candidate | Build stream::8.2 | Build number::762 | PassFail::Pass | ,|x| #x}} | Comments:: | Created::
|
| Software release::Candidate | Build stream::8.2 | Build number::763 | PassFail::Pass | ,|x| #x}} | Comments::however, WPA networks were not accessible, not sure if this is XO issue or network issue. | Created::
|
| Software release::Candidate | Build stream::8.2 | Build number::765 | PassFail::Pass | ,|x| #x}} | Comments:: | Created::
|