OLPC Firmware Q2A71

  This page is monitored by the OLPC team.

OLPC Firmware Production Release Q2A71 - 2006-12-21

This is the update release for the B-test build.

File:Olpc-Q2A71.rom

MD5: 11c14240aa81eaefa74c48131f5f3d51 olpc-Q2A71.rom

---

Changes since Q2A63

• EC: update to A71
• EC: Implement matrix button repeat scan code
• OFW: Update to SVN 60
• OFW: Added USB net device id 0b95,7720
• OFW: Fixed memory layout for virtual-mode support. Virtual support

has now been tested/working, but is not turned on in this version.

• OFW: Removed unused EGA console support hooks.
• OFW: Dialed back to 60 Hz refresh on VGA, as that seems to be the most widely supported.

---

Installation Caveats

• If you have a B1 system:

1. Perform the auto-reinstall procedure at http://wiki.laptop.org/go/Autoreinstallation_image before upgrading to this firmware version
2. DO NOT use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.

• After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.

ATest users only: If you use olpcflash to write this image, you must use the --brick option.
Example: olpcflash --brick -w image.rom
This will update your EC code.

Known issues

• Auto-repeat is slow on some USB keyboards
• NVRAM storage for configuration variables is not yet implemented.
• JFFS2 does not handle ECC
• The boot menu is incomplete
• Dirctory symlinks have a problem.

ATest -- Infineon RAMs only

Thise is a special purpose image. Do not use except on A-test boards with Infineon RAMS.

For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type

File:Olpc-Q2A71 CL2.5.rom

MD5: 590d383064cc32a2b392d678f9771269 olpc-Q2A71_CL2.5.rom