Tests/Flipsticks: Difference between revisions
< Tests
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
''Actions:''<br /> |
''Actions:''<br /> |
||
1)Select the name of the part from the "Parts Menu". <br /> |
|||
2)Click on the point that represents that part (selected name).<br /> |
2)Click on the point that represents that part (selected name).<br /> |
||
3)Move the part from side to side.<br /> |
3)Move the part from side to side.<br /> |
||
4)Check if the value of the angle input box is changing with the movement. |
4)Check if the value of the angle input box is changing with the movement. |
||
''Verify:'' |
''Verify:'' |
||
Revision as of 00:41, 24 March 2009
Manually moving each body part - Angle value changes
Actions:
1)Select the name of the part from the "Parts Menu".
2)Click on the point that represents that part (selected name).
3)Move the part from side to side.
4)Check if the value of the angle input box is changing with the movement.
Verify:
- when angle changes with the manual movement of a point/part then the test passes, otherwise - fail. Equivalence Partitioning used.