Tests/Flipsticks: Difference between revisions
< Tests
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
''Actions:''<br /> |
''Actions:''<br /> |
||
# |
|||
1) Select the name of the part from the "Parts Menu". <br /> |
#1) Select the name of the part from the "Parts Menu". <br /> |
||
2) Click on the point that represents that part (selected name).<br /> |
#2) Click on the point that represents that part (selected name).<br /> |
||
3) Move the part from side to side.<br /> |
#3) Move the part from side to side.<br /> |
||
4) Check if the value of the angle input box is changing with the movement. |
#4) Check if the value of the angle input box is changing with the movement. |
||
''Verify:'' |
''Verify:'' |
||
* when angle changes with the manual movement of a point/part then the test passes, otherwise - fail. Equivalence Partitioning used. |
|||
Revision as of 00:43, 24 March 2009
Manually moving each body part - Angle value changes
Actions:
- 1) Select the name of the part from the "Parts Menu".
- 2) Click on the point that represents that part (selected name).
- 3) Move the part from side to side.
- 4) Check if the value of the angle input box is changing with the movement.
Verify:
- when angle changes with the manual movement of a point/part then the test passes, otherwise - fail. Equivalence Partitioning used.