Replacing a wireless module: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
 
Line 12: Line 12:
[[File:Xo1.5wlan.jpg|400px]]
[[File:Xo1.5wlan.jpg|400px]]


The XO-1.5 WLAN module
The XO-1.5 WLAN module (p/n ADDEM113001 supercedes the module shown)

Latest revision as of 01:49, 27 October 2011

XO-1.5 or 1.75

There are a number of incompatible WLAN modules which are the same size and use the same miniPCIe connector. The compatible module is only available from OLPC.

Instructions:

  • disassemble the top Disassembly_top
  • unplug the two tiny coax connectors vertically away from the board
  • undo the single screw holding down the module
  • unplug the module from the motherboard
  • reassemble in the reverse order
  • the software may not recognise the module without going through the first boot sequence so either delete /etc/udev/rules.d/70-persistent* or reflash the operating system

Xo1.5wlan.jpg

The XO-1.5 WLAN module (p/n ADDEM113001 supercedes the module shown)