OLPC Firmware q7b10: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 39: Line 39:
=== Open Firmware ===
=== Open Firmware ===


* 3505, EC Code 0.3.07
* [http://tracker.coreboot.org/trac/openfirmware/changeset/3505 3505] OLPC XO-4 - EC Code 0.3.07,
* 3504, OLPC XO-4 - touchscreen, change to version 0.0.0.9, which caused a few more timing changes, requiring some fixes to the driver.
* [http://tracker.coreboot.org/trac/openfirmware/changeset/3504 3504] OLPC XO-4 - touchscreen, change to version 0.0.0.9, which caused a few more timing changes, requiring some fixes to the driver.
* [http://tracker.coreboot.org/trac/openfirmware/changeset/3503 3503] .caller - minor stack comment fix, no execution effect,
* 3502, OLPC XO-4 - fix support for non-touchscreen SKUs, compatible with touchscreen SKUs, treats TOUCH_HD# signal as active high, since the touchscreen controller is pulling the signal low in normal operation, momentarily enables a pull-down in conflict against the permanent pull-up, in order to sample the signal properly. Requires a BOM change for C2. Harmless on C1. <trac>12391</trac>,
* [http://tracker.coreboot.org/trac/openfirmware/changeset/3502 3502] OLPC XO-4 - fix support for non-touchscreen SKUs, compatible with touchscreen SKUs, treats TOUCH_HD# signal as active high, since the touchscreen controller is pulling the signal low in normal operation, momentarily enables a pull-down in conflict against the permanent pull-up, in order to sample the signal properly. Requires a BOM change for C2. Harmless on C1. <trac>12391</trac>
* 3500, OLPC - allow a touchscreen, if present, to prevent automatic test execution after left rocker key, <trac>11817</trac>,
* [http://tracker.coreboot.org/trac/openfirmware/changeset/3501 3501] OLPC XO-4 - EC Code 0.3.06 (redundant),
* [http://tracker.coreboot.org/trac/openfirmware/changeset/3500 3500] OLPC - allow a touchscreen, if present, to prevent automatic test execution after left rocker key, <trac>11817</trac>.


=== CForth ===
=== CForth ===

Revision as of 00:02, 3 January 2013

  This page is monitored by the OLPC team.

OLPC Firmware Release q7b08

Works on XO-4 B1 and C1 only. Do not use on XO-4 A or other models.

  • new EC 0.3.07 (no change log available),
  • touchscreen, change to version 0.0.0.9,
  • XO-4 C1 touchscreen detection, improve reliability by enabling a pull-down during the check, <trac>12391</trac>,
  • allow touchscreen to prevent automatic test execution after left rocker key, <trac>11817</trac>,
Download q7b10.rom
Build date time 2013-01-02 16:39:44
Source revision 3506
EC version 0.3.07
CForth version bbdf8572
WLAN 8686 version 9.0.7.p2
WLAN 8787 version 14.66.09.p80

Changes

Open Firmware

  • 3505 OLPC XO-4 - EC Code 0.3.07,
  • 3504 OLPC XO-4 - touchscreen, change to version 0.0.0.9, which caused a few more timing changes, requiring some fixes to the driver.
  • 3503 .caller - minor stack comment fix, no execution effect,
  • 3502 OLPC XO-4 - fix support for non-touchscreen SKUs, compatible with touchscreen SKUs, treats TOUCH_HD# signal as active high, since the touchscreen controller is pulling the signal low in normal operation, momentarily enables a pull-down in conflict against the permanent pull-up, in order to sample the signal properly. Requires a BOM change for C2. Harmless on C1. <trac>12391</trac>
  • 3501 OLPC XO-4 - EC Code 0.3.06 (redundant),
  • 3500 OLPC - allow a touchscreen, if present, to prevent automatic test execution after left rocker key, <trac>11817</trac>.

CForth

  • none

EC

WLAN

  • none