Release notes/13.2.0: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
Line 13: Line 13:
* New XO-1.75 firmware has sound incompatibility when used on old releases (<trac>12637</trac>)
* New XO-1.75 firmware has sound incompatibility when used on old releases (<trac>12637</trac>)
* XO-4 wake-on-WLAN more reliable (<trac>12573</trac>)
* XO-4 wake-on-WLAN more reliable (<trac>12573</trac>)

== Installation ==

=== XO-4 ===

{{Software_Install3|path=http://build.laptop.org/13.2.0/xo-4|release=13.2.0|build=4|filename=32004o4|model=XO-4|signed=no}}

=== XO-1.75 ===

{{Software_Install3|path=http://build.laptop.org/13.2.0/xo-1.75|release=13.2.0|build=4|filename=32004o2|model=XO-1.75|signed=no}}

=== XO-1.5 ===

{{Software_Install3|path=http://build.laptop.org/13.2.0/xo-1.5|release=13.2.0|build=4|filename=32004o1|model=XO-1.5|signed=no}}

=== XO-1 ===

{{Software_Install3|path=http://build.laptop.org/13.2.0/xo-1|release=13.2.0|build=4|filename=32004o0|model=XO-1|signed=no}}

Revision as of 23:27, 22 April 2013

  • First boot much quicker than before
  • Fixed some bottlenecks in pygobject/g-i, faster sugar and activity startup
  • Journal Share
  • Music Keyboard
  • 8787 wireless scans faster
  • XO-4 power management enabled
  • XO-4 sound recording in Squeak works (<trac>12400</trac>)
  • XO-4 sound recording in Etoys works (<trac>12549</trac>)
  • No more XO-4 white screen on shutdown (<trac>12543</trac>)
  • No more XO-4 cursor corruption (<trac>12556</trac>)
  • No more general XO-4 graphics corruption (<trac>12536</trac>)
  • ds-backup works again (<trac>12663</trac>)
  • New XO-1.75 firmware has sound incompatibility when used on old releases (<trac>12637</trac>)
  • XO-4 wake-on-WLAN more reliable (<trac>12573</trac>)

Installation

XO-4

How to install unsigned build 4 of release 13.2.0 on XO-4.

The build is installed to the internal storage device. You will need a USB drive or Secure Digital card of at least 1 GB capacity, but only for the duration of the installation. We recommend the drive be FAT formatted, but other formats are supported, see how to prepare a drive for use by the firmware for more details.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

  • Prepare the laptop:
    • Make a copy of any data you wish to keep,
    • Obtain a Developer key and disable security,
    • Check that the battery is inserted and locked,
    • Check that the power cord is in place and the battery indicator is green,
    • Turn off the laptop, unless it is already off,
    • Insert the USB drive into any USB port on the laptop,
  • Start installing:
    • Obtain the Ok prompt,
    • Type the command: (If you are using an SD card, substitute sd:\ for u:\ below.)
fs-update u:\32004o4.zd

Installation progress will be displayed. Green colour will fill grey blocks. It will take about five minutes. Once finished, the Ok prompt will return. You may remove the USB or SD drive. The laptop may be rebooted using the boot command or the power button.

The USB or SD drive can be used on other laptops.

Please report any Boot failed messages.

XO-1.75

How to install unsigned build 4 of release 13.2.0 on XO-1.75.

The build is installed to the internal storage device. You will need a USB drive or Secure Digital card of at least 1 GB capacity, but only for the duration of the installation. We recommend the drive be FAT formatted, but other formats are supported, see how to prepare a drive for use by the firmware for more details.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

  • Prepare the laptop:
    • Make a copy of any data you wish to keep,
    • Obtain a Developer key and disable security,
    • Check that the battery is inserted and locked,
    • Check that the power cord is in place and the battery indicator is green,
    • Turn off the laptop, unless it is already off,
    • Insert the USB drive into any USB port on the laptop,
  • Start installing:
    • Obtain the Ok prompt,
    • Type the command: (If you are using an SD card, substitute sd:\ for u:\ below.)
fs-update u:\32004o2.zd

Installation progress will be displayed. Green colour will fill grey blocks. It will take about five minutes. Once finished, the Ok prompt will return. You may remove the USB or SD drive. The laptop may be rebooted using the boot command or the power button.

The USB or SD drive can be used on other laptops.

Please report any Boot failed messages.

XO-1.5

How to install unsigned build 4 of release 13.2.0 on XO-1.5.

The build is installed to the internal microSD device. You will need a USB drive or Secure Digital card of at least 1 GB capacity, but only for the duration of the installation. We recommend the drive be FAT formatted, but other formats are supported, see how to prepare a drive for use by the firmware for more details.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

  • Prepare the laptop:
    • Make a copy of any data you wish to keep,
    • Obtain a Developer key and disable security,
    • Check that the battery is inserted and locked,
    • Check that the power cord is in place and the battery indicator is green,
    • Turn off the laptop, unless it is already off,
    • Insert the USB drive into any USB port on the laptop,
  • Start installing:
    • Obtain the Ok prompt,
    • Type the command: (If you are using an SD card, substitute sd:\ for u:\ below.)
fs-update u:\32004o1.zd

Installation progress will be displayed. Green colour will fill grey blocks. It will take about ten minutes. Once finished, the Ok prompt will return. You may remove the USB or SD drive. The laptop must be rebooted using the power button, not with the boot command.

The USB or SD drive can be used on other laptops.

Please report any Boot failed messages.

XO-1

How to install unsigned build 4 of release 13.2.0 on XO-1.

The build is installed to the internal NAND flash device. You will need a USB drive or Secure Digital card of at least 1 GB capacity, but only for the duration of the installation. We recommend the drive be FAT formatted, but other formats are supported, see how to prepare a drive for use by the firmware for more details.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

  • Prepare the laptop:
    • Make a copy of any data you wish to keep,
    • Obtain a Developer key and disable security,
    • Check that the battery is inserted and locked,
    • Check that the power cord is in place and the battery indicator is green,
    • Turn off the laptop, unless it is already off,
    • Insert the USB drive into any USB port on the laptop,
  • Start installing:
    • Obtain the Ok prompt,
    • Type the command: (If you are using an SD card, substitute sd:\ for u:\ below.)
copy-nand u:\32004o0.img

Installation progress will be displayed. Green colour will fill yellow blocks. It will take about five minutes. Once finished, the Ok prompt will return. You may remove the USB or SD drive. The laptop may be rebooted.

The USB or SD drive can be used on other laptops.

Please report any Boot failed messages.

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Release_notes/13.2.0&oldid=284690"