Overclocking the XO-1: Difference between revisions

From OLPC
Jump to navigation Jump to search
(Created page with '== Warnings == By overclocking your OLPC you are running the hardware outside the design specifications. Overclocking your CPU and/or RAM may cause stability problems, data error…')
 
No edit summary
Line 1: Line 1:
== Warnings ==
== Warnings ==
By overclocking your OLPC you are running the hardware outside the design specifications. Overclocking your CPU and/or RAM may cause stability problems, data errors, and possibly hardware damage. As the OLPC is passively cooled, physical damage could easily be
By overclocking the XO-1 laptop you are running the hardware outside the design specifications. Overclocking your CPU and/or RAM may cause stability problems, data errors, and possibly hardware damage. As the XO-1 is passively cooled, physical damage could easily be caused by excess heat.
caused by excess heat.


On the other hand, the processor will skip cycles if it is too warm, and will become slower as a result of heat.
The procedure detailed below is relatively safe, cpu and memory voltages are not changed, as that appears to require a hardware hack.

The procedure detailed below is relatively safe, because CPU and memory voltages are not changed, as that would require electrical changes.


== How to ==
== How to ==
Line 23: Line 24:
The table below lists the value you will need to overclock, and what speeds this value over (or under) clocks the CPU and RAM to.
The table below lists the value you will need to overclock, and what speeds this value over (or under) clocks the CPU and RAM to.


{{Overclocktable}}
{|
!Value
!CPU speed
!RAM speed
|-
|3d3
|333 MHz
|133 MHz
|-
|3d5
|366 MHz
|133 MHz
|-
|3d7
|400 MHz
|133 MHz
|-
|3d9
|433 MHz
|133 MHz
|-
|3db
|466 MHz
|133 MHz
|-
|3dd
|500 MHz
|133 MHz
|-
|3df
|533 MHz
|133 MHz
|-
|3e1
|566 MHz
|133 MHz
|-
|4d3
|333 MHz
|166 MHz
|-
|4d5
|366 MHz
|166 MHz
|-
|4d7
|400 MHz
|166 MHz
|-
|4d9
|433 MHz
|166 MHz
|-
|4db
|466 MHz
|166 MHz
|-
|4dd
|500 MHz
|166 MHz
|-
|4df
|533 MHz
|166 MHz
|-
|4e1
|566 MHz
|166 MHz
|-
|5d3
|333 MHz
|200 MHz
|-
|5d5
|366 MHz
|200 MHz
|-
|5d7
|400 MHz
|200 MHz
|-
|5d9
|433 MHz
|200 MHz
|-
|5db
|466 MHz
|200 MHz
|-
|5dd
|500 MHz
|200 MHz
|-
|5df
|533 MHz
|200 MHz
|-
|5e1
|566 MHz
|200 MHz
|-
|653
|333 MHz
|216 MHz
|-
|655
|366 MHz
|216 MHz
|-
|657
|400 MHz
|216 MHz
|-
|659
|433 MHz
|216 MHz
|-
|65b
|466 MHz
|216 MHz
|-
|65d
|500 MHz
|216 MHz
|-
|65f
|533 MHz
|216 MHz
|-
|661
|566 MHz
|216 MHz
|-
|6d3
|333 MHz
|233 MHz
|-
|6d5
|366 MHz
|233 MHz
|-
|6d7
|400 MHz
|233 MHz
|-
|6d9
|433 MHz
|233 MHz
|-
|6db
|466 MHz
|233 MHz
|-
|6dd
|500 MHz
|233 MHz
|-
|6df
|533 MHz
|233 MHz
|-
|6e1
|566 MHz
|233 MHz
|}


Now it's time to do the overclocking itself.
Now it's time to do the overclocking itself.
Line 202: Line 39:
If it worked, it will appear that nothing has happened. If you have pushed the settings too far your system may have frozen or spontaneously rebooted, just power off and choose a more conservative setting and try again.
If it worked, it will appear that nothing has happened. If you have pushed the settings too far your system may have frozen or spontaneously rebooted, just power off and choose a more conservative setting and try again.


Your XO-1 is now overclocked! Keep in mind that this overclock is only persistent until the system is rebooted. Making it permanent is an exercise left to the reader.
Your XO-1 is now overclocked! Keep in mind that this overclock is only persistent until the system is rebooted. Making it permanent was an exercise left to the reader. See [[Custom_bootloader#Sample_Uber_Bootscript]].

== References ==
== References ==


These instructions were rewritten from a guide posted on the OLPC News Forum. The original guide can be found [http://web.archive.org/web/20080402005123/http://olpcnews.com/forum/index.php?topic=2389.0 here].
These instructions were rewritten from a guide posted on the OLPC News Forum. The original guide can be found [http://web.archive.org/web/20080402005123/http://olpcnews.com/forum/index.php?topic=2389.0 here].

See also [[Custom_bootloader#overclock]].

Revision as of 23:00, 26 October 2015

Warnings

By overclocking the XO-1 laptop you are running the hardware outside the design specifications. Overclocking your CPU and/or RAM may cause stability problems, data errors, and possibly hardware damage. As the XO-1 is passively cooled, physical damage could easily be caused by excess heat.

On the other hand, the processor will skip cycles if it is too warm, and will become slower as a result of heat.

The procedure detailed below is relatively safe, because CPU and memory voltages are not changed, as that would require electrical changes.

How to

First, get to an Open Firmware Ok prompt.

Type the following commands:

ok 4c000014
ok rdmsr
ok u.
ok u.

After this, two hex values will be displayed. Write down the second one that is displayed. For example, this may display 7de009e.

Now you must choose how much to over (or under) clock your CPU and RAM speeds.

The table below lists the value you will need to overclock, and what speeds this value over (or under) clocks the CPU and RAM to.

XO-1 Overclock Settings
in MHz; default is 433/166 (4d9)
CPU Bus Speed
133 166 200 216 233
333 3d3 4d3 5d3 653 6d3
366 3d5 4d5 5d5 655 6d5
400 3d7 4d7 5d7 657 6d7
433 3d9 4d9 5d9 659 6d9
466 3db 4db 5db 65b 6db
500 3dd 4dd 5dd 65d 6dd
533 3df 4df 5df 65f 6df
566 3e1 4e1 5e1 661 6e1

Now it's time to do the overclocking itself.

Type the hex value you wrote down in the previous step into the prompt and press Enter. Then type the overclocking value you chose into the prompt and press Enter.

Next, type the following:

ok 4c000014
ok wrmsr

If it worked, it will appear that nothing has happened. If you have pushed the settings too far your system may have frozen or spontaneously rebooted, just power off and choose a more conservative setting and try again.

Your XO-1 is now overclocked! Keep in mind that this overclock is only persistent until the system is rebooted. Making it permanent was an exercise left to the reader. See Custom_bootloader#Sample_Uber_Bootscript.

References

These instructions were rewritten from a guide posted on the OLPC News Forum. The original guide can be found here.

See also Custom_bootloader#overclock.