Establishing a Mesh Portal: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
Line 56: Line 56:
</pre>
</pre>


You may have to try this command twice; yum sometimes runs out of memory doing dependency solving, and terminates before actually installing the RPM.
You may have to try this command twice; yum sometimes runs out of memory doing dependency solving, and terminates before actually installing the RPM. Keep trying until the last line says "completed!".


* Copy the xo-mpp-server RPM onto the XO and install it:
* Copy the xo-mpp-server RPM onto the XO and install it:

Revision as of 19:58, 15 April 2007

It's not entirely automatic quite yet; we'll get a more automatic solution in place soon.

Requirements

What to do

  • Boot up your XO
  • Switch to a virtual terminal (press Ctrl+Alt+F1), and log in as 'root'
  • Turn off NetworkManager, dhcdbd (the DHCP D-Bus daemon), and avahi
chkconfig --level 2345 NetworkManager off
chkconfig --level 2345 dhcdbd off
chkconfig --level 2345 avahi-daemon off
  • Set your init level to '3'; stopping Sugar and X from starting again.
nano /etc/inittab

find the line with:

id:5:initdefault:

and change the '5' to a '3' so it looks like this instead:

id:3:initdefault:
  • Plug the USB ethernet adapter into the XO
  • Reboot; type 'reboot' and press enter
  • Wait for the XO to boot to the login prompt, then log in as 'root'
  • Bring up the USB ethernet interface
ifup eth0
  • Install the DHCP daemon
yum -y install dhcp

You may have to try this command twice; yum sometimes runs out of memory doing dependency solving, and terminates before actually installing the RPM. Keep trying until the last line says "completed!".

  • Copy the xo-mpp-server RPM onto the XO and install it:
rpm -Uhv xo-mpp-server-0.1-1.noarch.rpm --force
  • Turn on various services at startup
chkconfig --level 345 network on
chkconfig --level 345 iptables on
chkconfig --level 345 dhcpd on
chkconfig --level 345 mpp on
  • Reboot; type 'reboot' and press enter

and it should all work

Further Reading

More information is available on these topics: