Tests/Photograph: Difference between revisions

From OLPC
Jump to navigation Jump to search
(New page: == Camera Activity Test Plan == ===Start the camera activity=== Justification: HIG for startup process; self for remaining Actions: # Start the camera activity by pressing the corr...)
 
No edit summary
Line 1: Line 1:
[[Category:Test Plans]]
== Camera Activity Test Plan ==
== Camera Activity Test Plan ==



Revision as of 16:18, 19 June 2007

Camera Activity Test Plan

Start the camera activity

Justification: HIG for startup process; self for remaining

Actions:

  1. Start the camera activity by pressing the corresponding button on they keyboard.

Verify:

  • A Camera icon is added to the activity ring on the home screen.
  • The Camera icon throbs to indicate the activity starting up.
  • That the camera activity starts properly.
  • That there is a real-time display of the camera's input being shown.
  • If you are using a B3 or later:
  • That the LED above the camera is on.
  • That the LED above the microphone is off.


Take a photo

Justification: self

Actions:

  1. Take a photo by clicking the eye icon.

Verify:

  • That a thumbnail of your photo is shown along the bottom edge of the screen.
  • That there is a real-time display of the camera's input being shown.


View the photo

Justification: self

Actions:

  1. Click on the thumbnail of the new photo.

Verify:

  • That your photo is displayed properly.


Check photo storage

Justification: HIG

Actions:

  1. Switch to the journal.

Verify:

  • That an entry has been created for your camera activity session.
  • That a thumbnail for your new photo is visible in that entry.


Switch to video mode

Justification: self

Actions:

  1. Switch back to the camera activity.
  2. Switch to video recording mode by clicking on the Camera tab and then clicking the camcorder button.

Verify:

  • That any thumbnails of your still photos are hidden.
  • That there is a real-time display of the camera's input being shown.


Begin video capture

Justification: self

Actions:

  1. Begin capturing video by clicking the eye icon.

Verify:

  • That the microphone LED turns on.
  • That the eye icon turns red.


End video capture

Actions:

  1. End the video capture by clicking the eye icon again.

Verify:

  • That the microphone LED turns off.
  • That the eye icon turns white again.
  • That a thumbnail of your video is shown along the bottom edge of the screen.


Play the video

Justification: self

Actions:

  1. Click on the thumbnail of the new video.

Verify:

  • That it plays correctly, including sound.


Check video storage

Justification: HIG

Actions:

  1. Switch to the journal.

Verify:

  • That, under the same journal entry as the photo you took earlier, a thumbnail for your new video is also present.


Delete the video

Justification: self

Actions:

  1. Switch back to the camera activity.
  2. Delete your video by clicking the small (x) on the thumbnail.

Verify:

  • That the video is removed.


Delete the photo

Justification: self

Actions:

  1. Switch back to still-photo mode by clicking on the still camera icon.
  2. Delete your photo by clicking the small (x) on the thumbnail.

Verify:

  • That the photo is removed.


Check deletion

Justification: self

Actions:

  1. Switch to the journal.

Verify:

  • That the entry does not contain the photo you took.
  • That the entry does not contain the video you took.Or should they stick around? -Zack Cerza 6/12/07 3:24 PM


Quit the activity

Justification: self

Actions:

  1. Switch back to the camera activity.
  2. Quit the camera activity by pressing the (X) key on your keyboard.

Verify:

  • That the activity closes properly, and that the LEDs for the camera and the microphone are turned off.