XS Configuration Management: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 126: Line 126:
chkconfig --level 345 ejabberd on
chkconfig --level 345 ejabberd on
service ejabberd start
service ejabberd start
* Create an account on ejabber for the administrator:
ejabberdctl ejabberd register admin schoolserver.school.pinewood.net admin
* Go to the web-based administration interface for ejabberd at <tt>http://schoolserver.school.pinewood.net</tt>,
and follow the instructions at [[Ejabberd_Configuration#Setting_Up_Shared_Roster|Setting up a shared roster]].
* Create an account for yourself (this is a test of basic network connectivity as well):
* Create an account for yourself (this is a test of basic network connectivity as well):
[http://dev.laptop.org/git?p=projects/xs-config;a=blob;f=fsroot.olpc.img/etc/sysconfig/olpc-scripts/mkaccount /etc/sysconfig/olpc-scripts/mkaccount] wad http://dev.laptop.org/~wad/dsa_public_key
[http://dev.laptop.org/git?p=projects/xs-config;a=blob;f=fsroot.olpc.img/etc/sysconfig/olpc-scripts/mkaccount /etc/sysconfig/olpc-scripts/mkaccount] wad http://dev.laptop.org/~wad/dsa_public_key

Revision as of 17:22, 18 January 2008

  This page is monitored by the OLPC team.

This page describes how the software packages comprising an XS School server are configured for different school sizes and needs.

This page is still growing

Server Configuration

The basic configuration of software on the server is currently provided through the Fedora yum and RPM package managers. We provide the entire Fedora 7 suite of software in our repositories, and you can easily install any supported software.

The lists of repositories searched (specified in /etc/yum.conf) is kept in /etc/yum.repos.olpc.d/.

Local Software Repositories

Please add instructions for extending a software install here

School Specific Configuration

We are working on a better configuration interface. Suggestions are welcome in the discussion page.

The default server setup is to connect to the Internet on the first wired ethernet network interface, using IPv4 DHCP. Laptops connect to the server over the wireless mesh using one or more Active Antenna, connected through USB interfaces. Optional second (and additional) ethernet interfaces are configured by default to provide an internal LAN within the school. Traditional WiFi access points, if used, should be located on this internal LAN.

XS Usage Common.pngFull Scale

User Access

For now, any network configuration and debugging is done through a terminal interface. See Troubleshooting School Servers for help determining what is wrong.

Access to the school server is via console login, or ssh. Console login must be used to establish accounts for ssh access. Root access via ssh is disabled by default, and accounts must use an SSH key for authentication. See setting up user accounts.

Networking

The school specific network configuration is done mostly using the network_config script, /etc/sysconfig/olpc-scripts/network_configwhich reconfigures the network interfaces and associated filed for a particular server identity (number). This script always assumes that a school server is a principal server, either the sole server in a school or the Internet gateway in a multi-server school. Associated /etc/sysconfig/olpc-scripts/auxiliary_config and /etc/sysconfig/olpc-scripts/principal_config scripts to change a server's role in the school network.

All these script generates normal Fedora network configuration files (ifcfg-eth0, ifcfg-br0, etc... in /etc/sysconfig/network-scripts/.

The networking configuration is performed at first boot of a software system, by a script which runs on every boot: /etc/init.d/olpc-network-config. On the first boot, this script runs the /etc/sysconfig/olpc-scripts/network_config script, configuring the network interfaces for the server assuming it is server number one.

There are two main usage scenarios: a single server providing access to a small school, and a set of servers cooperating to provide access to a larger school.

Small School Scenario

The default configuration supported by the software is that of a single School server supporting between one and one hundred and fifty students. Such a school server is equipped with one to three Active Antenna, which provide connectivity with the laptops over the wireless mesh. If the school server has a single wired networking interface, it is dedicated to obtaining internet access (a WAN port).

XS Usage Minimal.pngFull Scale

The network_config script may be run manually to reconfigure a system in response to a change in the wired interfaces, such as the addition of a second wired network interface.

Large School Scenario

The more common scenario is that a school server will be one of many in a school. As each school server provides additional network access and storage, the school infrastructure automatically scales with the number of servers installed. One school server typically provides the connection to the internet, and is designated the 'principal' school server. The other servers in a school are peers, and are designated 'auxiliary' school servers.

XS Usage Multiple.pngFull Scale

For purposes of backup, each laptop is associated with a single school server. Other services, including internet access, are provided either by the closest server or the principal school server. At installation time, each server is given a unique number (currently 1 through 8, soon higher). These numbers do not have to be sequential, but should be viewed as fixed --- if the server number changes, all kids data stored on that server will currently be lost...

When a server first boots, it currently configures itself to support the common usage scenario shown above. It assumes that it is both a principal server and server #1. On auxiliary servers, it is necessary to immediately manually re-run network_config with a unique server number for the school, and also make it an auxiliary server by manually running the auxiliary_config script.

Upon failure of a principal school server, any remaining school server may take its place. Simply run /etc/sysconfig/olpc-scripts/principal_config. This school server will retain its existing number, but will be now provide the services provided only by the principal school server, and will reconfigure its networking to act as the school's internet gateway.

Internet Connection

The internet (WAN) connection is currently the eth0 interface by default. The file which configures this interface is /etc/sysconfig/network-scripts/ifcfg-eth0. The current default is to use DHCP to assign an IP address to this interface, and obtain DNS server info.

IPv6

To enable external IPv6 you will have to configure the global address of the machine and setup an IPv6 tunnel. Unfortunately, you are not currently able to use IPv6 in school with multiple servers. We are working on this ASAP.

Instructions coming

Name Service

Manual Configuration

This name currently set to random.xs.laptop.org is unfortunately embedded in a number of files:

/etc/named.conf
/var/named/school.zone.inaddr.db
/var/named/school.zone.16.inaddr.db
/var/named/school.zone.32.inaddr.db
/var/named/school.zone.48.inaddr.db
/etc/resolv.conf
/etc/sysconfig/olpc-scripts/resolv.conf
/etc/dhcpd.conf
/etc/ejabberd/ejabberd.cfg
/etc/idmgr.conf

The state of the reverse address resolution is admittedly horrible (Trac ticket #6039).

User Accounts

When a school server is installed, it has no user accounts, remote (SSH) login to the root account is disabled, and remote logins must be authenticated using a public/private key pair. If exploring or developing with a school server, as root from the console you will need to add a new account (username wad in the example):

adduser wad
passwd wad
wget http://dev.laptop.org/~wad/dsa_public_key
mkdir /home/wad/.ssh
mv dsa_public_key /home/wad/.ssh/authorized_keys
chown -R wad:wad /home/wad/.ssh
chmod -R g-w /home/wad/.ssh

The public key, downloaded from http://dev.laptop.org/~wad/dsa_public_key in the above example, can be generated on any Linux system using the ssh-keygen command (which leaves your new public/private key pair in .ssh). You want to copy the id_rsa.pub or id_dsa.pub file to other machines to allow logins.

Example Configurations

Small School/Home School

The school domain name is going to be school.pinewood.net.

  • Install a new build from USB key. Reboot (manually, removing key), and log in as root
  • Edit /etc/resolv.conf and /etc/sysconfig/olpc-scripts/resolv.conf, replacing random.xs.laptop.org with school.pinewood.net.
  • Edit /etc/dhcpd.conf, replacing random.xs.laptop.org with school.pinewood.net (once).
  • Edit /etc/named.conf, replacing random.xs.laptop.org with school.pinewood.net (three places).
  • Edit /var/named/school.internal.inaddr.db, /var/named/school.internal.inaddr.db, /var/named/school.internal.inaddr.db, and /var/named/school.internal.inaddr.db, replacing random.xs.laptop.org with school.pinewood.net (once each)
  • Edit /etc/idmgr.conf, replacing random.xs.laptop.org with school.pinewood.net (twice)
  • Restart the DHCP, DNS, and idmgr services:
service dhcpd restart
service named restart
service idmgr restart
  • Edit /etc/ejabberd/ejabberd.cfg, replacing random.xs.laptop.org with school.pinewood.net (twice).
  • Enable ejabberd startup, and started it using:
chkconfig --level 345 ejabberd on
service ejabberd start
  • Create an account on ejabber for the administrator:
ejabberdctl ejabberd register admin schoolserver.school.pinewood.net admin

and follow the instructions at Setting up a shared roster.

  • Create an account for yourself (this is a test of basic network connectivity as well):
/etc/sysconfig/olpc-scripts/mkaccount wad http://dev.laptop.org/~wad/dsa_public_key
passwd wad
  • Add yourself to the wheel group, so that you have sudo priviledges

Large School

This is a step-by-step guide of what is needed to install in a large school, using XS build 150 (or later). Here is a diagram of the networking. Just for illustration, the principal school server is not school server one in this case:

XS Usage MultipleDetail.pngFull Scale

On a server with a single wired networking interface, it is considered the WAN port (eth0). If multiple wired network interfaces are provided, one is assigned to be the WAN port and the others LAN ports (eth1, eth2, ...) when <network_config is run (manually, or at first boot). The WAN ports of the two auxiliary servers are connected to a switch along with the LAN port of the principal server.

The school domain name (served by the principal school server) is going to be school.pinewood.net.

Principal Server

  • Install a new build from USB key. Reboot (manually, removing key), and log in as root
  • Edit /etc/resolv.conf and /etc/sysconfig/olpc-scripts/resolv.conf, replacing random.xs.laptop.org with school.pinewood.net.
  • Edit /etc/dhcpd.conf, replacing random.xs.laptop.org with school.pinewood.net (once).
  • Edit /etc/named.conf, replacing random.xs.laptop.org with school.pinewood.net (three places).
  • Edit /var/named/school.internal.inaddr.db, /var/named/school.internal.inaddr.db, /var/named/school.internal.inaddr.db, and /var/named/school.internal.inaddr.db, replacing random.xs.laptop.org with school.pinewood.net (once each)
  • Edit /etc/idmgr.conf, replacing random.xs.laptop.org with school.pinewood.net (twice)
  • Restart the DHCP, DNS, and idmgr services:
service dhcpd restart
service named restart
service idmgr restart
  • Edit /etc/ejabberd/ejabberd.cfg, replacing random.xs.laptop.org with school.pinewood.net (twice).
  • Enable ejabberd startup, and started it using:
chkconfig --level 345 ejabberd on
service ejabberd start
  • Create an account for yourself (this is a test of basic network connectivity as well):
/etc/sysconfig/olpc-scripts/mkaccount wad http://dev.laptop.org/~wad/dsa_public_key
passwd wad
  • Add yourself to the wheel group, so that you have sudo priviledges
  • This time, carry it further and make yourself a new private key for this school. This will allow you to securely access auxiliary servers hidden behind NAT! Log in as yourself and type:
ssh-keygen
sudo cp ~/.ssh/id_rsa.pub /var/www/html/my_name_pub_key

Auxiliary Servers

  • Install new build from USB key. Reboot (manually, removing key), and log in as root
  • Set the server number to two and set the role to auxiliary by running:
/etc/sysconfig/olpc-scripts/network_config 2
/etc/sysconfig/olpc-scripts/auxiliary_config
  • Edit /etc/resolv.conf and /etc/sysconfig/olpc-scripts/resolv.conf, replacing random.xs.laptop.org with school.pinewood.net.
  • Edit /etc/dhcpd.conf, replacing random.xs.laptop.org with school.pinewood.net (once).
  • Reboot to allow network changes to take effect, and log back in as root.
  • Create an account for yourself, using the key on the principal server:
/etc/sysconfig/olpc-scripts/mkaccount wad http://172.18.0.1/my_name_pub_key
passwd wad

At this point, you should be able to perform basic testing of the school servers.