User:MartinDengler
About Me
I program for a living. I got an XO to support the OLPC project and have a laptop for daily use.
I work with python and Fedora a lot.
Ambient temperature tracking
I found some trac bugs ( 800 (Trac #800) and 1285 (Trac #1285) ) that gave me a hint as to where the ambient temperature sensor's data are available:
cat /sys/class/power_supply/olpc-battery/temp_ambient
I saw it earlier but was led to believe the ambient temperature sensor was on the motherboard, not the battery. I'm not sure if this is the case; either it is, and the data being available under power_supply/olpc_battery is (at best) just confusing, or this is a temperature sensor on the battery and not the motherboard ambient temperature sensor that I'm looking for.
Update: well, it's clearly the "temp" file in olpc-battery, but temp and temp_ambient seem swapped:
bash-3.2$ cat /ofw/openprom/model ; echo CL1 Q2D13 Q2D bash-3.2$ cat /boot/olpc_build update.1 691 bash-3.2$ for f in /sys/class/power_supply/olpc-battery/temp* ; do (echo -e $f\\t ; cat $f) | paste - - ; done /sys/class/power_supply/olpc-battery/temp 2783 /sys/class/power_supply/olpc-battery/temp_ambient 3900
...but on #olpc papajuans reported sensible numbers (temp_ambient a bit lower than temp).
Misc snippets to remember
Backlight and blurring switched off, makes some pdfs more readable:
su -c "echo 1 > /sys/devices/platform/dcon/output"
How to explicitly forget/add a WPA wireless network
If you want to forget/add a WPA wireless network explicitly, stop NetworkManager (/etc/init.d/NetworkManader stop) and edit
/home/olpc/.sugar/default/nm/networks.cfg
Screen battery status hint
Date: Sat, 5 Jan 2008 18:09:19 +0000
From: Martin Dengler <martin@martindengler.com>
Subject: Battery capacity in screen hardstatus line hint
To: devel@lists.laptop.org
[-- PGP output follows (current time: Sat 05 Jan 2008 06:23:51 PM GMT) --]
gpg: Signature made Sat 05 Jan 2008 06:09:19 PM GMT using DSA key ID 75C7D2F8
[GNUPG:] SIG_ID AwM6Me4nlHAq/mT0qRJbz79n4sk 2008-01-05 1199556559
[GNUPG:] GOODSIG 81B444DD75C7D2F8 martin@martindengler.com
gpg: Good signature from "martin@martindengler.com"
[GNUPG:] VALIDSIG 565C8F33ABF72DAA33DEB9CB81B444DD75C7D2F8 2008-01-05 1199556559 0 3 0 17 2 01 565C8F33ABF72DAA33DEB9CB81B444DD75C7D2F8
[GNUPG:] TRUST_ULTIMATE
[-- End of PGP output --]
[-- The following data is signed --]
Hi,
In case this is of use to anyone, I've put the battery capacity in my
xo screen instance's hardstatus line with this tiny script & screenrc
change:
---------- /home/olpc/bin/olpc_screen_status.sh
#!/bin/bash
# Author: Martin Dengler <martin@martindengler.com>
# idea from http://www.mail-archive.com/screen-users@gnu.org/msg00322.html
# based on battery info from olpc-logbat
#
B_INFO=/sys/class/power_supply/olpc-battery
while true
do
CAP=`cat $B_INFO/capacity`
echo b:$CAP%
sleep 60
done
----------
....screenrc change:
---------- /home/olpc/bin/.screenrc
# run command forever and assign most recent output to string escape %1`
backtick 1 0 0 /home/olpc/bin/olpc_screen_status.sh
# the ...%1`... part at the end is the important part
hardstatus alwayslastline "%{.bW}%-w%{.rW}%n %t%{-}%+w %=%{..G} %H %{..Y} %m/%d %C%a %1` "
----------
I'd be interested to know how to get at the ambient temperature sensor mentioned in section 2.4.1 of the CL1 hardware design specification PDF. I've had a look around /sys/class but nothing's jumped out at me.