NAND Writing

From OLPC
Revision as of 02:32, 24 November 2008 by RafaelOrtiz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Stop hand.png WARNING:
The content of this section is considered
DEPRECATED and OBSOLETE
It is preserved for historical or documenting reasons.

Some recipes for putting filesystems onto NAND FLASH. See also Installing_to_NAND.

Bad Block Table Messed Up

This is a recipe for erasing the NAND Flash and rewriting it, in the event that the bad block table is potentially messed up.

Boot from a USB key, passing the cmdline argument "cafe_nand.skipbbt=1"

Login as root

modprobe mtdchar
flash_eraseall -j /dev/mtd0
nandwrite -p /dev/mtd0 build131.img

Reboot, and the BBT should be recreated as cafe_nand loads, based on the bad blocks found during formatting.

Copying Stuff on as Files

This is for when you don't have a preformatted JFFS2 image and you just want to make an empty filesystem and copy on some files.

 modprobe mtdchar
 flash_eraseall -j /dev/mtd0
 mount -tjffs2 mtd0 /mnt
 # Now use cp, or tar, or whatever to copy files into /mnt
 umount /mnt

Note that the "umount" command will sometimes take a while to finish.