The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Stream
|
,|x|Build stream::x}}
|
Category
|
Test category::SmokeTest
|
Sub-category
|
Test subcategory::Distance
|
Component
|
System component::
|
Feature
|
System feature::
|
Objective
|
Test objective::Get 2 XOs running the distance activity
|
Tools
|
Test tools::2 XO units
|
Setup
|
Test setup::
|
Procedure
|
[[Test procedure::Actions
- On both XO's click on the same network (whatever is available) in each of their network views; confirm they are both connected
- Open Distance with one XO
- Share the activity with the neighborhood
- Go to the Network view of that XO
- Go to the Network view of the second XO
- In the network view of the second XO click on the distance activity that the first one just shared
- On the first XO press the check key on the game pad to start measuring the distance
- Close the Distance activity
- Follow the same steps, but starting with the second XO (see that it works both ways)]]
|
Expected Results and Pass Criteria
|
[[Pass criteria::Verify
- The shared Distance activity shows up in the mesh view of both laptops
- The tiny circle with a check on the screen of both XOs should turn green
- The first XO should make sounds after the check key is pressed
- Both XOs should show the distance between each other on the screen
- Distance works both ways]]
|
Comments
|
More notes::
|
Release
|
Stream
|
Build
|
Pass/Fail
|
Trac Ticket(s)
|
Comment(s)
|
Date of Test
|
Software release::Candidate
|
Build stream::8.2
|
Build number::760
|
PassFail::Pass
|
,|x| #x}}
|
Comments::
|
Created::
|
Software release::Candidate
|
Build stream::8.2
|
Build number::762
|
PassFail::Pass
|
,|x| #x}}
|
Comments::
|
Created::
|
Software release::Candidate
|
Build stream::8.2
|
Build number::766
|
PassFail::Pass
|
,|x| #x}}
|
Comments::Signed upgrade, fine both ways.
|
Created::
|
Software release::Candidate
|
Build stream::8.2
|
Build number::766
|
PassFail::Pass
|
,|x| #x}}
|
Comments::olpc-upgrade candidate-766 lookin' good!
|
Created::
|
Software release::Candidate
|
Build stream::8.2
|
Build number::767
|
PassFail::Pass
|
,|x| #x}}
|
Comments::used an XO that was usb upgraded from 656 to 767 and an XO clean installed with 767. worked great on mesh channel 11
|
Created::
|
Software release::Candidate
|
Build stream::8.2
|
Build number::767
|
PassFail::Pass
|
,|x| #x}}
|
Comments::using two copy-nand clean installed gg-767-4 machines on channel 6, worked great.
|
Created::
|
Software release::8.2.0 (767)
|
Build stream::8.2
|
Build number::767
|
PassFail::Pass
|
,|x| #x}}
|
Comments::smoke testing new firmware q2e21, activity worked on both mesh11 and ml1cc.
|
Created::2008/11/05
|