XO1.5 Bringup

This page lists goals and plans for initial bringup of the XO 1.5 (CL1B) board.

Goals

The goal of a A-phase board bring-up is get a small number of boards to an acceptable state of functionality. At this point, a larger number of boards are modified to match and distributed for both extended testing of basic functionality (esp. memory stability) and development of software to access futher functionality.

The following are the goals of this bringup:

• Embedded Controller and power distribution working
• Memory controller working and memory stable (memtest86)
• OLPC display working
• Keyboard/mouse working
• USB working
• SD memory cards working
• Audio input and output
• Boots Linux kernel from USB or SD card
• C2/C3/Suspend/resume from OFW

Non-goals

• Camera input (driver won't be ready in time)
• Power management from Linux
• Windows boot
• SDIO WLAN
• X

Personnel in Taiwan

• Wad (EE), Richard (EC/OFW), Mitch (OFW), and Chris (Linux) from OLPC
• Gordon Chu (PM), Beckham Chen (EE), Danny Tsai (power), Gary Chiang (EE), Bryan Ma (EC Firmware) from Quanta R&D
• Harald Welte (Linux) and BIOS/memory controller expert from Via

Tools

• Cheetah SPI programmer qty 1 (Richard)
• Dediprog SPI programmer qty 1+ (Quanta)
• Artec LPC dongle (FLASH + port 80) qty 3 (Mitch 1, Richard 2)
• Cleverscope qty 1 (Mitch)
• PROMjet SPI FLASH emulator qty 1 (Mitch)
• OLPC serial port dongles + cables qty 10 (Mitch 2, Richard 2, wad 6)
• High speed, four channel oscilloscope (Quanta)

Sequence of Events

Dates still tentative

• (May 20) Richard arrives several days before bringup, to work together with Bryan Ma on final EC code.
• (May 25) wad and the boards arrive and bringup starts.
  • Get the EC running, including serial port
  • Basic power supply operation and sequencing
• (May 26) Mitch arrives
  • Basic Open Firmware startup
    • Use LPC FLASH emulator for < 1 minute build + download cycle time
    • Early execution tracing with port 80
    • Serial port
    • Initial memory controller setup
• (May 27) Via becomes involved (VX855 support)
  • Memory controller fine tuning
    • Via expert evaluates signals and suggests setting changes
    • Mitch provides fast turnaround OFW builds with new settings
  • VGA Video output
  • Keyboard/Touchpad
  • Start memory stability tests
  • SD card
  • USB
• At this point, OFW is generally functional for hardware debugging and bootloading
• (May 29/30) Chris Ball arrives to start Linux work
• (Jun 1) Harald Welte arrives, and the team splits into two: Hardware and Linux

Hardware

• Continues to work on either USB or SD if needed
• DCON and OLPC display
• RTC
• Audio
• Power management from OFW
• Lid switch, E-Book mode switch, front panel buttons

Linux

After initial boot, this is mainly driver testing of hardware as functionality is confirmed with OFW.

• Initial boot
• USB
• SD
• Video
• DCON and OLPC display
• Audio

Miscellanious

Lodging

We still haven't chosen a hotel for the OLPC team. Suggestions are:

• The Riviera - Mitch's suggestion
• The Royal Palace - MLJ's recommendation
• The Howard Plaza - wad's last digs (perfectly fine, but somewhat pricey -- $215 and $175/night )

Backups:

• The Agora Garden - Quite nice, but pricey and in the middle of a financial district blocks from from Taipei 101 --Wad