OLPC Firmware Q2B21

From OLPC
Revision as of 02:18, 15 January 2007 by 18.85.18.51 (talk)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
  This page is monitored by the OLPC team.

OLPC Firmware B2 Production Release Q2B21 - 2007-01-14

This is the firmware for the production test build of the B2 boards. But it will also work on B1 and ATest.

File:Olpc-Q2B21.rom

MD5: a4d80cd69dc06929a917bd291b5d312d olpc-Q2B21.rom

Changes since Q2B18

  • OFW: Update to r94
  • OFW: Updated NAND timings

Installation Caveats

  • If you have a B1 or B2 system:
  1. Perform the auto-reinstall procedure at http://wiki.laptop.org/go/Autoreinstallation_image before upgrading to this firmware version
  2. DO NOT use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.
  • After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.

ATest users only: If you use olpcflash to write this image, you must use the --brick option.
Example: olpcflash --brick -w image.rom
This will update your EC code.

Known issues

  • Auto-repeat is slow on some USB keyboards
  • NVRAM storage for configuration variables is not yet implemented.
  • JFFS2 does not handle ECC
  • The boot menu is incomplete
  • Directory symlinks have a problem.

ATest -- Infineon RAMs only

This is a special purpose image. Do not use except on A-test boards with Infineon RAMS.

For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type

File:Olpc-Q2B21 CL2.5.rom

MD5: 620819ff1909eb8c1ef0e061a1c40c84 olpc-Q2B21_CL2.5.rom

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=OLPC_Firmware_Q2B21&oldid=21047"