Installing XSCE on an XO1

From OLPC
Jump to navigation Jump to search

Overview

The XO-1 is a relatively older, and slower machine. It is not capable of supporting as many classroom client XO's as the later machines. But it is often freely available, and might be able to service a small class of 10-15 student machines (testing is still needed to find the upper limit).

As you can see from the hardware chart, the XO-1 has 256MB of RAM, and has 1GB of flash disk memory (about 700MB are required for the basic XO operating system, before any additional XSCE code is added). And the XSCE code itself take about 1.3GB. So the install process for XSCE, if it is going to work at all, needs a lot of help.

The first part of the install process disables the Graphical User Interface (GUI) because it takes RAM away from the install process (there is only 256MB available).

Also, the install will refuse to proceed if there is no SD card present in the optional slot at the lower right corner of the screen. This SD card should be fast, (class 10 is currently available), and at least 4 GB. Larger SD cards will be able to store student backups, and content, activities, and other services to the student's XO's. The 2013 typical prices of SD cards are:

Size Dollars
4GB $7
8GB $8
16GB $13
32GB $23
64GB $42

So there's really no point in using anything less than 8GB.

Later in the install process, the USB ethernet dongle, and wifi access point will need to be inserted in the USB ports (they can be installed before the process is begun).

XO Laptop Hardware Comparison chart

XO Processor/Speed Memory Hard Disk Idle Power Install Time Details URL
1.0 Geode/433MHz 256MB 1GB 7W 100Minutes [[ http://laptop.org/go/XO-1]]
1.5 Via/400-1000MHz 1000MB 4GB 5W 70Min [[ http://laptop.org/go/XO-1.5 ]]
1.75 ARM/800mHz 512MB 4-8GB* 2W 60Min [[ http://laptop.org/go/XO-1.75
4 dual core ARM/1000mHz 1-2GB* 4-8GB* 2W 40min [[ http://laptop.org/go/XO-4 ]]
  • optional memory and flash disk--usually lower value