ECO/7.1.2

This page is monitored by the OLPC team.

Software ECO, 2008-01-02

Title: Memory over-run; touchpad issues; include OFW

5800 - summary bug
- 5744, 5719, 5317 - filling NAND
- 5799 - mouse jumps to lower right of display

Is 5744 part of this patch? In the ticket, it refers to Update.1.

What is the relationship between 5317 and 5744 in regard to patches? Are any of these patches tested?

If you create a large file that effectively fills the NAND memory, you will not be able to boot the laptop.
- Critical bug as data is lost
- Root cause:
Sometimes when you touch the touchpad, the mouse will jump to the lower right of the display. (Note that this bug fix will not fix ALL problems with jumpy mouse or touchpad issues).
- Some laptops touchpads are so sensitive as to be unusable.
- Root cause:
We inadvertently included an earlier version of the firmware with the OS image in 653; so this build will include the latest firmware, which helps to recover if the internal battery is dislodged.
- When the laptop is moved or shipped there is a possibility that the battery will be dislodged and the laptop will no longer boot.

Patches for Memory and Touchpad issues are included in the trac items.

Reviewers should include: Bernie, Andres, Jim, Scott, Dave Woodhouse, Tomeu, WMB, Ivan

Specific tests include creating the NAND memory problem following the description in the Trac item.
The touchpad must continue to work after upgrade; and should NOT show any jumping to lower right of display. This can only be a negative test since it is not possible to force this behavior.
Automated upgrading - this needs to be tested on a small number of laptops in house and then on a larger number of developers laptops; then finally rolled out, possibly in a controlled fashion.
- Set the timezone and language parameters from sugar-control-panel before upgrade; ensure they are still there after
- Use activities that save files before upgrade; ensure they are still there after
- Download flash before upgrade: Adobe_Flash; ensure that it is still there after
- Install/test a printer before upgrading: Enabling_CUPS; is it still there afterwards
The build must be installed on MP, CTest and B4 systems
Upgrades from the previous release.
A Fresh install (as mfg).
1 Hour Smoke Test both using a fresh installation and an upgraded installation, looking specifically for regressions from the release reports.
More than one SKU and keyboard type are to be used during this testing, to catch regressions in keyboard identification.

In manufacturing this should be dropped in as quickly as possible.
In the field this should be part of an automated upgrade when released.

NAND Memory test

Following the same steps as found in track 5719, on build 653 first.
- I was not able to shutdown after filling NAND. I held the power button and then tried to boot up. It was not successful in booting sugar and the final linux msg was: No space left on device.
- I repeated the test after upgrade to 656.