Keyboard replacement

From OLPC
Revision as of 19:32, 23 May 2008 by Nlee (talk | contribs) (→‎Step 2)
Jump to navigation Jump to search


Pencil.png NOTE: The contents of this page are not set in stone, and are subject to change!

This page is a draft in active flux ...
Please leave suggestions on the talk page.

Pencil.png

With experience, this can likely be done within 20 minutes. Expect the process to take around an hour if this is your first time!

Keyboardstep0.jpg


Opening the handle

Step 1

Remove the battery.
Take out the five screws under the battery case.
Pull off the white panel on the handle.


Keyboardstep1d.jpg
Keyboardstep1e.jpg


Step 2

Unplug the connection between the battery and computer.
Unscrew the hinge.
Keyboardstep2c.JPG
Keyboardstep2d.jpg


Remove the four screws in the handle.
Pull out the green piece on the edge of the handle.
Push down the bottom of the laptop.
The bottom should come off as one piece.


Step 3

Keyboardstep3a.jpg
Keyboardstep3b.JPG
Keyboardstep3c.jpg
Keyboardstep3d.jpg


Keyboardstep3e.jpg
Keyboardstep3f.jpg
Keyboardstep3g.jpg
Keyboardstep3h.jpg


Keyboardstep3i.JPG
Keyboardstep3j.jpg
Keyboardstep3k.JPG
Keyboardstep3l.jpg


Step 4

Keyboardstep4a.JPG
Keyboardstep4b.jpg
Keyboardstep4c.jpg
Keyboardstep4d.jpg


Step 5

Keyboardstep5a.jpg
Keyboardstep5b.jpg
Keyboardstep5c.jpg


Keyboardstep5d pickrightscrew.jpg
Keyboardstep5d.jpg
Keyboardstep5e.jpg
Keyboardstep5f.jpg


Keyboardstep5g.jpg
Keyboardstep5h.jpg
Keyboardstep5i.JPG


Step 6

Keyboardstep6a.JPG
Keyboardstep6b.jpg
Keyboardstep6c.jpg


Keyboardstep6d.jpg
Keyboardstep6e.jpg
Keyboardstep6f.JPG


Keyboardstep6g.JPG
Keyboardstep6h.jpg
Keyboardstep6i pickrightscrew.jpg
Keyboardstep6i.jpg


Step 7

Keyboardstep7a.jpg
Keyboardstep7b.jpg
Keyboardstep7c.jpg


Keyboardstep7d.jpg
Keyboardstep7e.jpg