Disassembly XO person

From OLPC
Revision as of 05:34, 10 June 2008 by Wad (talk | contribs) (New page: {{TOCright}} This is a description of how to disassemble the top section of an B4 preproduction XO laptop to replace the wireless antenna (rabbit ears). This is part of the ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is a description of how to disassemble the top section of an B4 preproduction XO laptop to replace the wireless antenna (rabbit ears). This is part of the Disassembly section of the Troubleshooting Guide and Repair Manual.

Removing the "XO Person" on the back cover

It is recommended to swap covers to change the XO colors, instead of swapping just the "XO person"

Step 1

Turn the back plate over. Note where the colored plastic fits in.
Use a screwdriver to pop these out


Turn plate over so the XO man faces you. Pull the plastic part out.
Note how the tabs fit in with the back plate.


Replacing the "XO Person" on the back cover

Step 1

Fit the new piece in the back plate and snap it back in place.