Installing an activity pack

From OLPC
Revision as of 15:29, 10 June 2008 by Pgf (talk | contribs) (added "remove key before restart" step, rephrased unsecure XO advisory)
Jump to navigation Jump to search
Merge-arrows.gif
It has been suggested that this article or section be merged with Activity_pack. (Discuss)
  1. Download its zip file.
  2. Unzip it onto the root of a USB flash drive.
  3. Insert the USB flash drive into your XO and reboot.
  4. If your machine is not a secure XO (its firmware is unlocked), you must hold the X game key while booting .
  5. When the installation is complete, the XO will shut itself off. Remove the USB key before powering it on.

Notes

  • The USB flash drive should be formatted with a VFAT file system (FAT16 with long filename support); this is the common format for most USB sticks with capacity up to 2 GB.
  • You can perform steps 1 and 2 on another computer, or if you are familiar with the Linux command line, on the XO in a terminal using wget and unzip.
  • After step 2, the root of the USB flash drive should contain
 /customization-2
 /boot
 /bundles