Test group release notes/2009 and earlier
NOTE: Entering issues on this page does not count as reporting them.
Use Trac to file bugs.
Notes here can reference trac items, but please file a bug in trac as higher priority than notes on these pages.
Purpose of Test Group Release Notes
The latest stable build is 13.2.11 || 2020-01-29. If you are thinking of going beyond to load a new image: come to this page first and see if the build has any major problems. If it can't even pass the Smoke Test, you probably don't want to use it.
If you don't see anything here on the latest release, please add your notes on smoke test and/or basic functionality to help the next guy.
- Kim
Smoke Test, Changelogs
General smoke and regression tests:
Joyride Builds
Build joyride-2230
Ran Software Update to get new activities.
- Browse and Log Viewer do not appear to update properly -- SW Update keeps listing them as un-updated even after supposedly updating them (<trac>7640</trac>). Workaround: delete the offending activities and re-run Software Update.
XOs being used for the smoketest are running the following:
- Build: Joyride-2230
- Firmware: CL1 Q2E12 Q2E
- Libertas: 5.110.22.p17
XOs being used for the smoketest are connected to the internet through School Wifi.
- Telepathy: gabble
- Jabber: schoolserver.media.mit.edu
- essid: media lab 802.11
- Channel: 11
Collaboration: Chat-43
- Sharing with Neighborhood works in both directions without visible issues (G02 starting the activity with W08 joining, and vice versa).
Collaboration: Browse-94
- Shared bookmarks appear to work without issues.
Collaboration: Read-45
- PDF file doesn't seem to transfer from "host" XO to the joining XO(s).
Collaboration: Record-56
- XO(s) joining a shared Record activity freeze?
Collaboration: Write-55
- Shared Write activity appears to work without issues.
(Tickets to bugs found will be added once the tickets are submitted.)
Build joyride-2140
Activities: Measure doesn't display properly -- the waveform area is grey, but the Sugar interface up top and the scrollbar on the right show properly. TamTamJam does not start.(<trac>7467</trac> and <trac>7466</trac> respectively.)
Image Transferring and Invite: Copying to the clipboard and Journal appears to work, however the image cannot be pasted from the clipboard to the Write activity, nor can it be pasted by using the Image menu. (File is named "Clipboard object: ." for some reason -- possibly connected? See <trac>7468</trac>) The second XO experienced no visible issues when invited to the Write activity, and both laptops were able to share the activity and see each others' changes.
Installing an Activity Bundle (Browse): Implode installs, but hangs when running; maybe same issue as with TamTamJam? (Running Browse-92.)
- Not the same as TamTam. I mailed the Implode author with diagnosis info. It needs an update for new sugar/GTK+ API. Please test another activity instead, e.g. Distance (AcousticMeasure) -DanielDrake 17:35, 11 July 2008 (UTC)
- Okay, redid this part of the test with Block Party, which seems to have downloaded, installed and run properly. -Charlie 14:05, 14 July 2008 (UTC)
Installing a Library Bundle (USB): Wikibooks-4.xol is not installed (is not present in /home/olpc/Library/) after clicking start in the Journal. Possible MIME-type issue? Copying Wikibooks-4.xol to /home/olpc/Library/ from the USB stick did not fix the problem.
Installing a Library Bundle (Browse): Bible-en.xol downloads, but is not installed (is not present in /home/olpc/Library/). Clicking 'Start' in the Journal does not do anything -- possibly a MIME-type issue? (<trac>7427</trac>, running Browse-92.)
- 7427 is unrelated, we need a new ticket -DanielDrake 17:35, 11 July 2008 (UTC)
Installing a Library Bundle (offline): Phyla PDF downloads; when started through Journal, Read starts but no document appears. (Running Browse-92.)
Transfer files to USB stick: Clipboard image does not load on other XO; probably related to results from Browse/Write sharing.
Update.1 Builds
Latest candidate: disabled
Build 709 Q2E12
Startup:
- Cleaninstall; added activities with the bundles directory (peru activities)
- Connected to medialab 802.11, browsed the web
- Connected to WPA (olpc), and connected to WEP (canopy), browsed the web
Activities:
- Pippy, sequence to test out audio
- Record, took pictures
- TamTam - played a few quick sounds
- Opened Turtle Art and Scratch
- Copied an image from the browser to the clipboard and onto a write doc
- Saved it; retrieved it from the journal
Sharing:
- Two laptops shared the following properly:
- Chat
- Write
- Record photos
- Browser links
Some activities I shared with the neighborhood, some I used the private invitation.
Build 708 Q2D16 (8.1.1 RC1)
Startup:
- Connected by default to school mesh, was able to access an open AP (media lab 802.11), WEP (canopy), and WPA (olpc) fine.
Activities:
- Measure: no problems
- TamTam: see <trac>7159</trac>
- Record: records/plays back properly, no problems.
- Paint: resumes fine, no problems
Image transfer/invite:
- No problems.
Activity Install:
- Activity installed/ran from USB fine.
- Activity downloaded/installed/ran from web fine.
Library Bundle Install:
- Installed and opened fine from web.
- Installed and opened fine from offline.
Playing .ogg file in Browse:
- No problems.
USB transfer:
- All activities resumed properly.
Chat:
- Works properly both ways.
Distance:
- Works properly both ways.
Journal stress-test:
- Not tested
Suspend/Resume:
- No problems encountered.
Build 706 Q2D14
Smoketest
Boot:
- No bugs/errors encountered.
- WEP/WPA: not tested
Activities:
- Measure: fine
- TamTamJam: fine, but took about 20-30 seconds to load.
- Record-photo: saved fine, loaded fine
- Record-video: saved fine, loaded and played fine
- Record-audio: saved fine, loaded and played fine
- Paint: drawing with the touchpad works fine, drawing with the pen-tablet works fine but response is a little jerky
- Pippy: fine
- Calculate: fine
Image Transferring and Invite:
- No bugs/errors encountered.
Installing an Activity Bundle from USB Key:
- No bugs/errors encountered.
Installing an Activity Bundle from the Web:
- No bugs/errors encountered.
Installing a Library Bundle - Online:
- No bugs/errors encountered.
Installing a Library Bundle - Offline:
- No bugs/errors encountered.
Playing an .ogg file in Browse:
- No bugs/errors encountered.
Transfer Files to USB stick:
- No bugs/errors encountered.
Suspend/Resume:
- No bugs/errors encountered.
Peru Build 703 Q2D16 (8.1.0, also known as "Update.1")
Startup:
- Boots fine.
- Joins schoolserver by default.
Activities:
- Measure/Medir: Fine
- TamTamJam:
- Takes about 20 seconds to start/resume.
- The default key to start the drumset (/) is not in the position indicated by the keyboard -- instead it is the -/_ key that activates it.
- Record/Grabar: Fine
- Paint/Pintar: Fine
- Wikipedia: Takes about 20 seconds to start/resume. (Expected)
- Speak: Fine
- Sudoku: Fine
Image Transferring and Invite:
- Browse opens properly.
- Invite works properly.
- No issues.
Installing Activity from USB Key:
- No issues.
Installing Activity from the Web:
- No issues.
Installing a Library Bundle:
- Online
- .xol files downloaded, but while they are present in the journal they are not present in the clipboard, nor in /home/olpc/Library/ -- and thus do not load.
- Which files are you downloading? The server needs to have the right mimetype set for the bundles to install.
- .xol files downloaded, but while they are present in the journal they are not present in the clipboard, nor in /home/olpc/Library/ -- and thus do not load.
- Offline
- Opens and downloads fine, however, the Biology (Biologia) pages and the Phyla PDF are in English -- shouldn't they be in Spanish on the Peru build?
- Opens and downloads fine, however, the Biology (Biologia) pages and the Phyla PDF are in English -- shouldn't they be in Spanish on the Peru build?
Playing .ogg file in Browse:
- No issues.
Transfer Files to USB Stick:
- No issues.
Collaboration with Chat:
- No issues.
Collaboration with Distance:
- No issues.
Trying Different Connection Types:
- No issues, XO started up and connected to the school server by default.
Suspend/Resume Due to Cover Close:
- No issues.