OLPC Firmware Q2A53

  This page is monitored by the OLPC team.

OLPC Firmware Production Release Q2A53 - 2006-12-1

This is the update release for the B-test build.

File:Olpc-Q2A53.rom

MD5 a1af762465a6b2a0a8939d51d6e31f9e olpc-Q2A53.rom

Changes since Q2A52

• OFW: Some nand write fixes for spurious errrors
• OFW: Fix a build error on ATest due nand fixes.

Installation Caveats

• After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.

ATest users only: If you use olpcflash to write this image, you must use the --brick option.
Example: olpcflash --brick -w image.rom
This will update your EC code.

BTest-1 users should NOT use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.

Known issues

• Auto-repeat is slow on some USB keyboards
• NVRAM storage for configuration variables is not yet implemented.
• JFFS2 does not pay attention to the bad block table.
• JFFS2 does not handle ECC
• The boot menu is incomplete
• Dirctory symlinks have a problem.

ATest -- Infineon RAMs only

Thise is a special purpose image. Do not use except on A-test boards with Infineon RAMS.

File:Olpc-Q2A53 CL2.5.rom

MD5: 2331a33116b65bd885c1efcfdf02a6e7 olpc-Q2A53_CL2.5.rom