| Stream
|
,|x|Build stream::x}}
|
| Category
|
[[Test category::{{{testcase_category}}}]]
|
Sub-category
|
[[Test subcategory::{{{testcase_subcategory}}}]]
|
| Component
|
System component::
|
| Feature
|
System feature::
|
| Objective
|
Test objective::
|
| Tools
|
Test tools::
|
| Setup
|
[[Test setup::--
- Open the TurtleArt activity.
- Drag a 'forward' block onto the field and remove it's value by dragging it onto the toolbox.
- Connect another 'forward' block immediately below the first 'forward' block. Leave its value as 100.
- Connect a 'print' block immediately below the last 'forward' block.
- Place a 'ycor' value in the print block.]]
|
| Procedure
|
[[Test procedure::Test Procedure (repeat for all test values below):
- Click the 'clean' button at the top of the screen.
- Connect the math function under test to the input of the first 'forward' statement.
- Change the default values to the values specified by the test.
- Run the sequence.
- Make sure the value printed to the output matches the expected value.
- In all cases, the turtle must have moved upwards, be at the upmost position of the drawn line and facing upwards.
Test Values:
| # | Top Value | Bottom Value | Expected Result |
|---|
| [Addition] |
| 1. | 23.2 | 12.3 | 135.5 |
| 2. | -32.4 | 2.8 | 70.4 |
| 3. | 5.6 | -9.8 | 95.8 |
| 4. | -07 | -2 | 91.0 |
| 5. | 0.0 | 3.5 | 103.5 |
| 6. | 4.6 | 0.0 | 104.6 |
| 7. | 0.0 | 0.0 | 100.0 |
| [Subtraction] |
| 8. | 23.2 | 12.3 | 110.9 |
| 9. | -32.4 | 2.8 | 64.8 |
| 10. | 5.6 | -9.8 | 115.4 |
| 11. | -07 | -2 | 95.0 |
| 12. | 0.0 | 3.5 | 96.5 |
| 13. | 4.6 | 0.0 | 104.6 |
| 14. | 0.0 | 0.0 | 100.0 |
| [Multiplication] |
| 15. | 2.2 | 2 | 104.4 |
| 16. | -2.4 | 3 | 92.8 |
| 17. | 5 | -9.8 | 51.0 |
| 18. | -07 | -2 | 114.0 |
| 19. | 0.0 | 3.5 | 100.0 |
| 20. | -4.6 | 0.0 | 100.0 |
| 21. | 0.0 | 0.0 | 100.0 |
| [Division] |
| 22. | 2.2 | 2 | 101.1 |
| 23. | -2.4 | 3 | 99.2 |
| 24. | 5 | -9.8 | 99.4 |
| 25. | -07 | -2 | 103.5 |
| 26. | 0.0 | 3.5 | 100.0 |
| 27. | -4.6 | 0.0 | Error message |
| 28. | 0.0 | 0.0 | Error message |
| [Modulo Values] |
| 29. | 18 | 8 | 102.0 |
| 30. | -2.4 | 3 | 100.6 |
| 31. | 5 | -9.8 | 95.2 |
| 32. | -07 | -2 | 99.0 |
| 33. | 0.0 | 3.5 | 100.0 |
| 34. | -4.6 | 0.0 | Error message |
| 35. | 0.0 | 0.0 | Error message |
| [Square Root Values] |
| 36. | -1 | Error message |
| 37. | 0 | 100.0 |
| 38. | 1 | 101.0 |
| 39. | 4 | 102.0 |
| 40. | 7 | 102.6 |
]]
|
Expected Results
and Pass Criteria
|
Pass criteria::
|
| Comments
|
More notes::
|