XS Release Notes

From OLPC
Revision as of 20:03, 14 February 2012 by DanielDrake (talk | contribs)
Jump to navigation Jump to search

Please read these notes to understand the capabilities and known problems with a particular release of the XS ("XO School server") software. For older release notes, see XS Release Notes archived.

XS 0.7

Read steps to install.

  • Rebased onto CentOS 6.2.
  • Linux-3.2 backported from Fedora 15 for maximum hardware compatibility
  • Supports installation on top of existing RHEL-compatible install (e.g. CentOS), in addition to regular install media
  • Interoperates better when run on an existing network - you are no longer required to make the XS 'run' the network.
  • Networking setup greatly simplified: no more bonding
  • eth0 is now the LAN, eth1 is now WAN. This is the opposite of previous XS releases, aimed at situations where no WAN connection is available (or when running on a previously existing network).
  • Active antenna and mesh support dropped.

Known issues/untested items:

  • XS-on-XO1 not generated for this release (and XO-1 mesh is no longer supported)
  • No tested upgrade path from XS-0.6. Feedback/documentation welcome.

XS 0.6

XS 0.6 was released on 07 October 2009!

  1. Download OLPC-School-Server-0.6-i386.iso ,
  2. Read steps to install. From XS-0.5.x, the upgrade is easy -- see upgrade notes.

This release provides

Recommended reading:

Known issues:

XS 0.5.2

XS 0.5.2 was released in March 18th, 2009!

  1. Download OLPC-School-Server-0.5.2-i386.iso ,
  2. Read steps to install. From XS-0.5, you can 'yum update'.

This release provides important bugfixes for ejabberd, activation and installation.

XS 0.5.1

XS 0.5.1 was released in January 28th, 2009!

  1. Download OLPC-School-Server-0.5.1-i386.iso ,
  2. Read steps to install. From XS-0.5, you can 'yum update'.

This release provides important bugfixes for networking and ejabberd.

XS 0.5

XS 0.5 was released around November 15, 2008.

  1. Download OLPC-School-Server-0.5-i386.iso ,
  2. Read steps to install.

This release provides:

  • Major improvements in installation and upgrade infrastructure
  • Major improvements in the network configuration -- allowing up to 8192 devices on the LAN
  • Now based on Fedora 9, which brings major overall improvements and better security support
  • An install and upgrade service for activities, complementing the OS upgrade service
  • Simple One Time Password (SOTP) scheme for administrator password management
  • A cryptographic signing scheme to ensure the XS only accepts trusted content and configuration
  • A newer eJabberd Jabber server for better scalability in the presence service
  • Significantly tighter security
  • A simple Moodle installation

Notes:

  • If you are upgrading from 0.4 or earlier there are special upgrade instructions.
  • Some issues with the LAN port have been identified, please use the latest 0.5.x instead.

WLAN Firmware: 5.110.22.p14-1.fc9 Kernel: 2.6.26.6-79.fc9 xs-config: 0.5.6.gb81

XS 0.4

  1. Download OLPC_XS_0_4.iso ,
  2. Read steps to install.

This release provides:

  • A complete reimplementation of xs-config, and a upgrade-and-cleanup from earlier configurations.
  • An upgrade server for the XO.
  • RSSH-jailing of ds-backup
  • PAM SOTP package (unconfigured)
  • DHCP Leases for up to 512 Devices off the LAN NIC.
  • See Example school server configuration for a step-by-step installation and configuration guide.
  • Backup and restore of XO journal. Requires XO running 8.2 or later. Documentation at XS_Blueprints:Datastore_Simple_Backup_and_Restore

WLAN Firmware: 22.p6 Kernel: 2.6.23.1-23.fc7 xs-config: 0.3.6-1

Notes

  • Upgrades: With this release you can now upgrade sanely from earlier version. The steps are:
    1. Recommended: Backup the system! :-)
    2. Edit /etc/yum.repos.olpc.d/stable.repo - set the 'baseurl' of the 'olpc' repo to http://fedora.laptop.org/xs/stable/olpc/xs-0.4/i386/
    3. Run yum -y upgrade
    4. You will have to re-run /etc/sysconfig/olpc-scripts/domain_config <yourbasedomain>
    5. Some new system daemons are set to start on the next restart - either restart the machine or start them manually. The services that need starting should be: incrond, apache
  • New installations: there is a bug in Anaconda which prevents it from setting the ownerships and permissions correctly in the /library directory. After installation, execute chown -R xs-rsync.xs-rsync /library/xs-rsync/{pub,tmp,state}
  • This release contains the DS-Backup implementation, with a restore facility aimed mainly at the test team. The user-friendly (and privacy-friendly) version of this will be part of Moodle - coming to a build near you soon. For production deployments you might want to disable the restore page. See documentation on this feature here.
  • This build requires a minimum of a 5.5Gig hard drive to install -- thanks to Grant Patterson for the kickstart fixes for trac 7241 .