DisplayLink

From OLPC
Revision as of 15:01, 6 October 2010 by Martinlanghoff (talk | contribs) (Created page with '= Adding a DisplayLink USB-VGA adapter on XO-1.5 = I was somewhat successful making this adapter work on my XO-1.5 running Fedora 11 (os205) <ol> <li> Install kernel development…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Adding a DisplayLink USB-VGA adapter on XO-1.5

I was somewhat successful making this adapter work on my XO-1.5 running Fedora 11 (os205)

  1. Install kernel development libraries and get the udlfb kernel driver
    yum install kernel-devel kernel-headers gcc glibc glibc-devel glibc-headers
    git clone http://git.plugable.com/webdav/udlfb/
  2. make & make install it
  3. Your external display should go green when you install the kernel module
    modprobe udlfb
  4. Get xorg development libraries and the xorg driver
    sudo yum install xorg-x11-server-devel.i586
    git clone http://git.plugable.com/webdav/xf-video-udlfb/
  5. make and make install it
  6. copy the (incorrectly installed) driver to the right place
    sudo cp -a /usr/local/lib/xorg/modules/drivers/* /usr/lib/xorg/modules/drivers/
  7. Set up xorg.conf (this is the difficult bit).

I was able to make this work with either the external display or the built in panel, but not both at the same time. If the panel comes first in ServerLayout, then the external display is not used at all. If the external display comes first then both displays "work", but the built in panel has severe graphics corruption. I created two ServerLayout sections and hacked olpc-dm to select the external display if it was plugged in on boot.

(Originally by user Carrot -- moved here from Adding USB SVGA)