OLPC Firmware q7a13

From OLPC
Revision as of 00:38, 6 September 2012 by Quozl (talk | contribs)
Jump to navigation Jump to search


Pencil.png NOTE: The contents of this page are not set in stone, and are subject to change!

This page is a draft in active flux ...
Please leave suggestions on the talk page.

Pencil.png
  This page is monitored by the OLPC team.

OLPC Firmware Release q7a13

Works on XO-4 A2 only. Do not use on A1. Aiming for B1 build.

Download q7a13.rom
Build date time
Source revision 3296
EC version 0.1.08
CForth version 7b873ab6

Changes

OpenFirmware

  • correct the interrupt routing for the camera controller, (<trac>12090</trac>).
  • suppress image size smaller than disk size now that builds size themselves to available space,
  • undo change to firmware upgrade version check, (<trac>12079</trac>), <trac>12091</trac>),
  • graphical touchscreen tests for signal analysis, XO_4_Touch_Testing,

CForth

  • treat delete key as backspace, for compatibility with Linux terminals attached to serial console,
  • turn off the storage indicator during suspend.

EC

WLAN