Release notes/13.2.4/Installation/XO-1/SD
< Release notes | 13.2.4 | Installation/XO-1
Jump to navigation
Jump to search
How to install signed build 16 of release 13.2.4 on XO-1, to an SD card in the external slot.
ALL USER DATA WILL BE ERASED FROM THE LAPTOP AND THE CARD!
- select an SD card of at least 4GB capacity; it will be erased by the process below,
- select a USB drive of at least 1GB capacity,
- download 32016o0.zip (606 MB) and expand the contents onto the USB drive,
- Shutdown the XO-1,
- insert the USB drive and the SD card into the XO-1,
- hold down all four game keys above the power button,
- turn on the laptop,
- wait for the message Release the game keys to continue,
- release the game keys, progress will be displayed, grey blocks will turn green, and the screen will show:
Blocks/square: 2 Total blocks: 15283 Now writing: 70 0 % Installing to SD card ..... please wait.
- after a few minutes it will show:
Blocks/square: 2 Total blocks: 15283 Now writing: 0 0 % Rebooting in 10 seconds ... please wait.
- it is finished, you may the USB drive then, during the reboot, or after the reboot.