Tests/Neighborhood view

From OLPC
< Tests
Revision as of 21:33, 28 June 2007 by Zack (talk | contribs)
Jump to navigation Jump to search

Notes

We are going to want to test the following scenario on at least three different network topologies:

  1. All XOs using a WiFi AP
  2. All XOs using a school server as an MPP
  3. No AP or MPP present.

So I'm thinking we may want to have three separate versions of this plan, but I'm hoping that's not necessary...

Also, you'll notice that I am very vague here about which activity to start, or what if anything to do once inside it. This is intentional, as this test plan only intends to test the mesh view itself. Filtering, searching, etc. will be going into this plan also.

Setup:

  • No AP previously set up on any XO
  • No school server
  • Need anywhere from 2 to N XOs (Is N 100?)


Boot the XOs

Justification: HIG

Actions:

  1. Boot up each XO.
  2. On each XO, switch to neighborhood view.

Verify:

  • That all XOs can see each other.


Start an activity

Justification: HIG

Actions:

  1. On the first XO, start any activity.

Verify:

  • That all XOs can see the shared activity.
  • That the activity icon took on the colors of the XO sharing it.

Join the activity

Justification: HIG

Actions:

  1. One by one, join the activity on all XOs.
  2. On each, switch to the neighborhood view.

Verify:

  • That all XOs are seeing the same activity state.
  • That all XOs appear to be clustered around the shared activity.


Close the activity

Justification: HIG

Actions:

  1. One by one, close the activity on all XOs.

Verify:

  • That after each XO closes the activity, it no longer appears clustered around it.