Test group release notes/2009 and earlier

From OLPC
Jump to navigation Jump to search

NOTE: Entering issues on this page does not count as reporting them.

Purpose of Test Group Release Notes
If you are thinking of loading a new image; come to this page first and see if the build you are going to load has any major problems. If it can't even pass the Smoke Test, you probably don't want to use it.

If you don't see anything here on the latest release, please add your notes on smoke test and/or basic functionality to help the next guy.
- Kim

Use Trac to file bugs.

Regression/Smoke Test

General smoke and regression tests:

1 Hour Smoke Test

Full-build smoke test

This set of test cases represents a quick smoke test that the build should pass. See the smoke tests for a particular release for more details.

  1. Boot into sugar
  2. Check the OS, OFW, kernel from developer's console
  3. Check wireless firmware version: from virtual terminal type ethtool -i eth0.
  4. Connect to a local mesh and see other XOs (this needs to be in a location with no school server or infrastructure AP)
  5. Run 3 collaborative activities concurrently (AbiWord, Connect4, or Chat) with 2 other XOs
  6. Run Browse and ensure that library navigation sidebar and index page loads; successfully browse the internet.
  7. Ensure that the journal loads properly at start and is able to resume an activity.
  8. Connect to an AP (and/or school mesh) and browse the web

Smoke tests for particular releases

List of SmokeTest test cases

The following queries for smoke tests in the wiki. Some tests are out-of-date, despite claiming "Any" {{#ask: Test category::SmokeTest

 | ?Short name
 | ?Test objective
 | ?Build stream=For builds
 | default=No articles found in Category:Test cases with Property:Test category of SmokeTest?!

}}

Build release notes / Changelog

Please add build release notes below and provide info as to whether the build passed the smoke test.

Test Builds

Changelog info


Build 649, Ship.2 Release

1 Hour Smoke Results

  • This build has successfully booted into sugar on WP and unsecured laptops. The journal loads.
  • Tried out a few activities: chat (3way), record (bug with lost pictures is fixed), write, measure, tamtam, browse, paint, pippy.
    • There are some issues with Write shutting down when trying to use it with Chat #5249
  • I successfully downloaded the gmail activity; and ran it; read some mail.
  • I tried to download the Lewis Carrol bundle, but it didn't seem to show up on my library links even after refresh. Can't resume from journal either, so I can't figure out how to see this bundle.
  • Image transfer: It takes a really, really long time to insert an image into AbiWord -- there is no indication that anything is happening, #5175.
    • Private and public invitation to write worked via salut (no jabber service at this time).

-kim

Build 642

(should be the same as 641 except that it has security turned off, no ohm, and fewer activities)

1 Hour Smoke Test Results

  • Try out a few activities: Good
    • mime type issue with record still there.
  • Image Transferring and Invite: Good
  • Installing an Activity Bundle: Good
    • GCompris activities aren't working well right now, so I installed implode from the web, which worked fine
    • I installed Watch and Listen 10 from a usb key, which was a bit slow, but worked fine.
  • Installing a library bundle: Broken
    • The downloaded files are still going in /home/olpc/Library, which the index in browse is no longer using. (this was a change made to comply with rainbow)
  • Playing an .ogg file in Browse: Good
  • Transfer files to USB stick: Good
    • again, mime type issues with record still.
  • Collaboration with Chat: Good

Build 641 (first Ship2 candidate)

Wireless update

  • 5.110.20.p4 is on 7 machines that will continue to run all weekend. These machines have HW ECOs, and have removed ohm (rpm -e ohm) since any chance of suspend/resume was causing problems (which continued to plague us during reboot, for instance). They looked good after removing ohm.
  • Another suspend/resume issue is that if you hit the power button on the front of the laptop with or without the power adapter plugged in you could get into a very bad state. trac 5074
  • I was not successful sharing a Write doc across 3 laptops with both text and an image (I didn't try an image alone). This failed in both link local and medialab AP with jabber modes. Most likely the link local problem was a crash in presence. Not sure what the jabber problem is -- Yani tried it again on the same machines and it did share... something intermittent??

- kim

  • On a C1 I had to touch /etc/ohm/inhibit-suspend in order to keep wireless up when the machine was unplugged.
  • I failed to connect to the network at a Marriott Courtyard without killing NetworkManager and manually configuring.

- cscott

  • Anything earlier than C2 or laptops with all HW ECOs will require inhibit-suspend. Even with inhibit-suspend, if you hit the 'power' button on the front - you can get strange suspend behavior (5074, above). This is why I have removed ohm.
  • I had a VERY difficult time with the tracpad on one of my C2 laptops after upgrading to q2d04l.rom. It jumped to the lower right corner nearly every time it sensed a new tap; which immediately brings up the sugar frame and causes much frustration. I now understand when people complain about this when it is at it worst.
  • I rebooted, I did the 4 finger salut, and a couple of us tried using it for about 30 minutes. Then I downgraded the OFW and it worked well again. I rebooted a few times and it always came up working well. Then I put the q2d04l.rom OFW back on ... and it still works well. I've rebooted a few times and it still works well. I'm confident that we will get some laptops returned because of this problem. Need to get to root cause.

- kim


Build Joyride 348 - 357

WIRELESS BROKEN

  • as of joyride 348, a new wireless firmware was put in, which is broken


Old Release Notes

Firmware Release Notes