OLPCities/Sprites
Jump to navigation
Jump to search
This Class is part of the Gamelib, created by Scott Porter and updated by Brent Silby. Gamelib is available under the terms of the GNU Library General Public Licence.
By definition a sprite has "frames" (horizontal frames) and "animations" (vertical frames). It can have only one frame so it will have 1 "frame" and 1 "animation" that are the same.
To understand this better take a look at the many sprites at:
To use this library (this Class) add this line to the <HEAD> section of the web page of the Lot:
<script language="Javascript" src="http://www.dmu.com/olpc/gamelib_sprites.js"></script>
Better to click this link and "save" the library at the same folder of the web page or put it at another folder at the same server and make a reference:
if you put it at the same folder, the line would be:
<script language="Javascript" src="gamelib_sprites.js"></script>
To create an "object" of the Class:
someName = new Sp_Sprite();
Due to the continuing rendering problems under Linux platforms, add the following statement to your script before creating the sprites:
Sp_linuxcompatible=true;
Methods
clearCollisionArea() Removes the collision area from a sprite. See the setCollisionArea().
clearRoute() Stops sprite from following a route. See setRoute().
clearRouteLoop() Stops the sprite from looping through a route. It will continue following its
current route until the end.
destroy() Will "destroy" the sprite object.
setCollisionArea(n,n,n,n) Sets the collision area for a sprite. The parameters passed are the distances
from the left, right, top and bottom .
setCollisionZTest(n) Sets the maximum distance another sprite can be within in the Z axis to be
able to collide with this sprite. See the setZ(n).
setRoute (Boolean,n,n,...) sets a route for the sprite to follow. The first argument specifies whether
the sprite should loop (true means loop, false means don't) through the route.
After the first argument, any number of numeric x,y values
which specify the co-ordinates the sprite should visit during the route.
getHits() Will return an array containing references to all the sprites this sprite hit
during the last gameloop.
hasHit(Object) Test if the sprite has hit another.
moveTo(n,n) Moves sprite to position on screen.
setDir(n,n) Sets sprite directions.
setXlimits(n,n) Limits the sprite x movement.
setYlimits(n,n) Limits the sprite y movement.
setImage(String,n,n,n,n) Sets the sprite image. The arguments to this method are passed in the
following order: the image src (eg "mypicture.gif"); width of each frame;
height of each frame; number of "frames"; number of "animations".
setFrame(n) Sets the sprite's frame (horizontal). Each frame can have a number
of animations (vertical). Using this resets to the first animation for
the frame (animation position 0). You must set a frame for a sprite before it
will be displayed at all. If a sprite only has one frame/animation,
use setFrame(0).
setFrameByDirection (n,n,n...) This method is used to specify which frames the sprite should use when it's
heading in different directions. The arguments are in sets of 3, and are of
the form degree,degree,frame, degree,degree,frame etc etc. So if you wanted
a sprite to use frame 0 when it was moving in the direction between 50 and
70 degrees, and frame 1 when it was moving between 71 and 100 degrees, you
could use something like this:
mySprite.setFrameByDirection(50,70,0,71,100,1);
setAnimation(n) Sets the sprite's animation stage for the frame
setAnimationLoop(n,n) Sets the animation limits for a frame between the first and second arguments.
This is used when using a canvas image with animations of varying lengths
(for example, 2 stages of animation for one frame, 5 for another frame etc)
setAnimationRepeat(n) When this is set to a value above -1, the sprite will animate x times.
A value of -1 means "keep animating indefinately".
setAnimationSpeed(n [,String]) The first argument sets the sprites animation "speed(number of frames
between animation changes) A value of 0 means
no animation. The optional second argument is either "forward"
or "backward" (case insensitive).
setSpeed(n) Sets the sprite speed.
getXYdegs() This method will return the sprite's current direction as degrees, an
integer between 0 and 359.
setXYdegs(n) Sets the sprite direction between 0 and 359 degrees.
setZ(n) Sets the sprite z-index. Sprites with higher values move over
those with lower ones
switchOn() Switches the sprite on. When a sprite is created, it is off by
default, and so not visible.
switchOff() Switches the sprite off
dragType (n) Defines how the sprite can be dragged (see makeDraggable() method
which must be used first). The dragType can be one of the following:
0 = normal dragging (default).
1 = Sprite can only be dragged in the y axis.
2 = Sprite can only be dragged in the x axis.
follow(Object,n,n) Causes the sprite to follow another sprite or the mouse object, remaining
at distance n,n from the object it's following. A sprite can only follow one
object at a time, so you MUST use the stopFollowing() method before you make
a sprite follow something else!
makeDraggable() Makes the sprite draggable! * Note: You must have the mouse module
linked in to use this
makeUndraggable() Stops the sprite from being draggable!
setCollide(Boolean) If true, the sprite will register collisions. If this is false, then the
hit events will not work (default=false)
stopFollowing() Causes the sprite to stop following another sprite or the mouse
useHitEvents(Boolean) If true, then sprite will use hit events (and hard hit events) as defined below.
setHitEvent(Object,String) String argument is function name or any legitimate JavaScript statement)
to be called when this sprite hits another.
target (Object,n,n) The sprite will now move toward the Sprite Object, offset from its top left
corner by x,y pixels (passed as the second and third arguments. Whether it
catches a moving sprite or not depends on the speeds of the two sprites.
A sprite can only target one object at a time, so use the stopTargetting()
method before you make a sprite target a new object.
stopTargetting(String) Stops the sprite from targetting another sprite. If the String 'drift' is
passed (ie mySprite.stopTargetting('drift')) then the sprite will continue
moving in the direction it was before it stopped targetting.
makeHard () Makes the sprite "hard" for collisons.
setHardHitEvent(String) The string argument is a function or JavaScript statement to be called when this
sprite hits ANY hard sprite. You must enable hit events for the sprite to use
this (see useHitEvents() method)
Properties
Read only if not especified differently
on Use this to determine whether the sprite is on/off.
When off, it's not on screen.
x Sprite's X position
y Sprite's Y position
z Sprite's z position. Sprites with higher value will pass over sprites with lower.
xmin The minumum allowed x position for sprite.
ymin The minimum allowed y position for sprite.
xmax The maximum allowed x position for sprite.
ymax The maximum allowed y position for sprite.
width The width of sprite
height The height of sprite
xdir The direction of sprite in x axis
ydir The direction of sprite in y axis
xydegs The current direction of sprite as 0-359 degrees
speed The speed of sprite.
hard True if an sprite is hard
frame The current frame being used by an animated sprite.
animpos The current animation position for a frame.
animdir The direction of animation, either "forward" or "backward".
animspd The number of frames between animation changes. 0 means no animation.
<b>onmouseover [=String]</b> Is R/W The string is the function name to be called when the mouse
pointer has moved over the sprite. This CAN include arguments so
mySprite.onmouseover="dosomething(x,y,z)" would pass the variables x,y,z
to the function dosomething
<b>onmouseout [=String}</b> Is R/W. The string is the function name to be called
<b>onclickdown [=String]</b> Is R/W The string is the function name to be called
<b>onclickup [=String]</b> Is R/W The string is the function name to be called
draggable Whether the sprite is draggable or not.
hitevents Whether this sprite is using hit events (see setHitEvent() method
beingfollowed True if sprite is being followed by another object
following The sprite this sprite is following
followingx The x offset to sprite this sprite is following
followingy The y offset to sprite this sprite is following