This page is monitored by the OLPC team.
This page describes the disassembly of the XO laptop.
|
|
|
IMPORTANT! Read This First!
Before you disassemble your laptop, there are some things you should know about staying safe around electricity and small parts. In brief:
- Protect your eyes. Watch out for small pieces of plastic or metal. If you have glasses or safety goggles, wear them.
- Watch out for electric shock. Always unplug your XO and take out the battery before you disassemble.
- Be careful. Use a clear workspace so you can see what you are doing, and keep small parts in bowls so they don't fall off the table. Avoid dropping metal objects on the motherboard. Use common sense - if you find yourself yanking really hard on a part, it's probably not supposed to come off that way!
Read the Disassembly safety section for more information on how to stay safe. The laptop is designed to be easy and safe to take apart, but caution is always a good idea.
|
|
|
|
|
Here's what you'll need to take apart your XO.
- A clean, flat surface to work on, with adequate light. Choose a workspace where wind will not blow dust inside the XO and where curious animals will not disrupt your work.
- Phillips head #1 screwdriver. Magnetizing your screwdriver will make it easier to work with screws.
- A clean container (or several) to hold screws and other small parts. Bowls and cups work fine.
- Optional: anti-static mat or anti-static wrist strap. Connect these to an earth ground.
If you want to do a large number of more complex repairs, you might want to consider investing in a Repair center kit.
|
|
|
|
|
You should go through the Disassembly top instructions if you need to access:
- The screen
- The backlight
- The game buttons
- The power button
- The speakers
- The "rabbit ear" wireless antennae
- The motherboard
- The colored "XO Person" on the back
|
|
|
|
|
You should go through the Disassembly bottom instructions if you need to access:
- The spare screws in the handle
- The keyboard
- The touchpad
- The mouse buttons
- The battery
- The "latches" that hold in the "rabbit ear" wifi antennae
- The rubber feet
|
|
For older versions of these instructions, see Disassembly/Archive.