Talk:Disassembly bottom

Things that need to be fixed:

General: we need an excellent system for indicating the different kinds of screws. I think having a picture with the three piles of screws used and indicating which one is being used. Hypothetically in the format of a white piece of paper with some dividers drawn. We could potentially draft such a PDF that people could print out, and that repair centers/XO hospitals could laminate and use.

Removing the handle cover / reaching the screws Step 2

picture 1 removing the white handle panel is much more easily done by pushing on the tab in the battery case on the other side of the laptop

picture 3 highlight the 6 extra screws

Removing the hinge / disconnecting the top and bottom halves of the XO Step 2 need 4 circles instead of two (there are 4 screws)

Removing the bottom cover step 1 picture 2 needs the screw graphic picture 2 needs an arrow so that it is more language independent

Removing the ALPS (touchpad and keyboard control) board Step 1 add a picture where all three tabs are highlighted in the same picture Step 2 Picture 2 needs an arrow

Replacing the ALPS Step 1 needs another picture with the screws, and with the screw graphic Step 2 needs a picture which highlights all three cables, also there are 4 pictures of ribbon cables, but only 3 ribbon cables so that's really confusing

Replacing the hinge Step 1 picture 1 needs an arrow picture 2 needs an arrow, also the ear needs to be a little higher up so that we can tell what the hand is doing. picture 3 also note that the screws are fat.. I like the screwdriver holding the right screw. picture 4 need 4 bubbles not 2

Replacing the handle cover step 1 picture 1 needs an arrow Step 2 both pictures need arrows