OLPC Firmware q2e14

From OLPC
Revision as of 19:03, 22 August 2008 by Wmb@firmworks.com (talk | contribs) (q2e14)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  This page is monitored by the OLPC team.

OLPC Firmware Release q2e14 - 2008-08-22

This firmware is a test candidate for the 8.2 release. It has a lot of fixes, and supports dual-boot (Linux and Windows XP). Download: q2e14.rom

Changes since OLPC Firmware q2e12

  • svn 888 / trac #8089 - turn on AES unit when starting the OS
  • svn 887 / trac #1339 - enable SD card insert/remove interrupts
  • svn 886 / trac #8052 - enable AC97 audio unit when starting the OS
  • svn 838,872,883,884 - fixed a configuration variable problem
  • svn 876 - fixed a "zero-page" problem that caused problems with Linux 2.6.26
  • svn 873,874 / trac #7880 - fixed partition numbering glitches in NAND partioning
  • svn 867 - Include the frame buffer in the high-address map area to make "sysrq to OFW" work
  • svn 865 / trac #7774 - support some USB mass storage devices that used to fail
  • svn 864 / trac #7725 - fixed SD command/data timeouts
  • svn 861 / trac #7702 - fixed random hang with SD cards > 4 GB
  • svn 854,855,856,857 - Added ls-r and to-file commands for recursive directory listing - useful for NAND-full analysis
  • svn 853 / trac #7572 - security files can be in a separate partition
  • svn 852 / trac #6967 - don't fail to boot if external device contains developer key for a different machine
  • svn 875 - fixed chopped-up text in graphics mode 12 for Windows
  • svn 862,863 - ACPI fixes for Windows
  • svn 851 - Windows XP suspend/resume support

OpenFirmware is svn 889

EC code is pq2e14

  • Speedup command processing and PS/2 data propagation

WLAN firmware is 5.110.22.p1

Which Firmware Do You Have?

If your machine is not in secure mode, the firmware version is displayed in the startup banner, as in:

 OLPC B4, 256 MiB memory installed, S/N SHF7250024D
 OpenFirmware  CL1   Q2D07 Q2D
                     ^^^^^

If your machine is in secure mode, you can go to the Terminal activity and type

 cat /ofw/openprom/model

If your machine is in secure mode but the OS will not start, just go ahead and try to upgrade the firmware anyway. The procedure is safe and will not do anything if you already have up-to-date firmware.

Beginning with firmware Q2D08, you can see the firmware version in secure mode by powering up with the "check" game button held down.

Beginning with OS Build 690 (or less?) you can also go to the main screen, click on the little man and select "about this XO"


Installation

When installing new firmware, you must have a well-charged battery and the AC adapter plugged in. The firmware update code will not proceed otherwise. Possible error messages are:

error message how to fix
AC not present plug in the power cord, check the battery LED is on, then try again.
No external power plug in the power cord, check the battery LED is on, then try again,
No battery plug in the battery, check the latches, then try again, or try another battery,
Battery low allow more time for the battery to charge, then try again, or try another battery.

Unsecured Laptop

This section is for unsecured laptops. Most XO-1.5 and XO-1.75 laptops are unsecured. Most developer XO laptops are unsecured. To unsecure your laptop, follow the instructions at Activation and Developer Keys.

You may install using either:

  • a USB drive or SD card,
  • the laptop's internal drive,
  • a network.

Choose one.

Using a USB drive or SD card

  • check the battery is inserted and locked,
  • check that the power cord is in place and the battery indicator is green,
  • insert the USB drive or SD card,
  • turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
  • if the downloaded file is on a USB drive, type:
 flash u:\q2e14.rom
  • if the downloaded file is on an external SD card:
 flash sd:\boot\q2e14.rom
  • wait for the laptop to reboot itself,
  • remove the USB drive or SD card.

(Expert users may remove the USB drive after the message "Got firmware" ... at this stage the file has been read and closed.)

Using the laptop internal drive

An alternate method is to download the firmware file to the laptop internal drive and then install from the internal drive.

  • start the laptop,
  • connect to a wireless or wired network,
su
cd /versions/boot/current/boot/
wget http://dev.laptop.org/pub/firmware/q2e14/q2e14.rom
  • check the battery is inserted and locked,
  • check that the power cord is in place and the battery indicator is green,
  • turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
  • if the downloaded file is on an XO-1, type:
flash n:\boot\q2e14.rom
  • if the file is on the internal SD card of an XO-1.5 or XO-1.75:
flash int:\boot\q2e14.rom

Using a network

You will need a compatible USB to ethernet adapter, or an open or WEP wireless access point, connected to the internet.

  • check the battery is inserted and locked,
  • check that the power cord is in place and the battery indicator is green,
  • turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
  • if using wireless, type the essid of the wireless network:
essid mynetwork
  • if using a WPA wireless access point, type the WPA key for the network:
wpa passphrase
  • type the flash command using the download link above, but change all slash characters so they are backwards, for example:
flash http:\\dev.laptop.org\pub\firmware\q2e14\q2e14.rom

Secured Laptop

Secured laptops can only use flash firmware that has been signed. All mass-production machines had the latest firmware at the time of manufacture.

Upgrading firmware describes how to upgrade to a newer signed firmware release.

See also

  • Cheat codes for information about how game buttons control startup options.