USB update to 8.2

Prepare

• be sure your XO is turned off

• plug your XO to a power source.

• plug the USB stick into any one of the three USB ports.

Start

• hold down all four gamepad keys (on the right side of the screen, above the power button).

be sure to get all four.

• while still holding the four gamepad keys, push the power button to turn the XO on.

You may need your other hand to do this.

• keep holding down the four gamepad keys until the message "Release the game key to continue" appears on the screen.

This will happen fairly quickly, a couple seconds at most.

Go

• Release the gamepad keys. If you see a grid of black and other colored boxes on your screen, congratulations! Your XO is reflashing.
• Just sit back and let it do its thing.

It will take about 10 minutes

Done

• your XO will automatically reboot when it is done.

Your XO may reboot twice, playing the little XO tune both times.

• it will reboot automatically and ask you for a name, as if it were brand new.

In extreme cases of software failure you may need to remove the power source and the battery if any light keeps flashing in your XO.