Tests/Flipsticks

From OLPC
Jump to navigation Jump to search

Test Sequence 1 - Stick figure and key frame testing

Specificaitons

Purpose: The aspects of this part of the program to be tested are the individual points/parts of the Flipstick figure, the editing area, the dragging of the figure in a specific direction, the key frame, pose save, clearing the edit area and frames, speed of movement, and edit of frames while animating.

Prereq:

  • When points/parts are moved, the value of the input box of that specific point/part should change.
  • Figure should not leave the edit area.
  • Figure moves in the specific direction (top, right, bottom, left).
  • Selected frame displays in the edit area the figure pose in the frame and can be edited.
  • Pose is saved in a selected key frame after the camera button is clicked.

Test Data:

  • Points/Parts of stick figure.

Technique: Equivalence Partitioning used in selecting the test cases for this sequence.

Steps


Manually moving each body part - angle value

Actions:

  1. Select the name of the part from the "Parts Menu".
  2. Click on the point that represents that part (selected name).
  3. Move the part from side to side.
  4. Check if the value of the angle input box is changing with the movement.

Verify:

  • Pass: when value in the angle box changes according to movement.
  • fail: when value in the angle box does not change according to movement.


Stick figure off edit area

Actions:

  1. Click on the green point to drag the figure.
  2. Move the stick figure around the edit area.
  3. Check if the stick figure leaves the edit area.

Verify:

  • Pass: if stick figure does not leave edit area.
  • Fail: if stick figure leaves edit area.


Dragging stick figure in a certain direction

Actions:

  1. Click on the green point on the stick figure.
  2. Move the mouse up.
  3. Check if the stick figure moves up.
  4. Move the mouse down.
  5. Check if the stick figure moves down.
  6. Move the mouse right.
  7. Check if the stick figure moves right.
  8. Move the mouse left.
  9. Check if the stick figure moves left.

Verify:

  • Pass: if figure moves according to mouse movement.
  • Fail: if figure does not move according to mouse movement.


Selecting a keyframe and editing it

Actions:

  1. Select a frame.
  2. Check if the stick figure in the frame looks like the figure in the edit area.

Verify:

  • Pass: if the edit area displays the stick figure in the selected keyframe.
  • Fail: if the edit area does not display the stick figure in the selected keyframe.


Camera button

Actions:

  1. Click on a part/point of the body.
  2. Change its angle and/or size.
  3. Click on the button that has a camera on it.

Verify:

  • Pass: if the pose from the edit area appears in the selected key frame after the camera button is clicked.
  • Fail: if the pose from the edit area does not appear in the selected key frame after the camera button is clicked.

Test Sequence 2 - Input Testing

Specifications

Purpose: To test the inputs of the program are applied correctly and the body parts move accordingly.

Prereq:

  • It is assumed Flipsticks program is already running and the stick figure is in the default position.
  • It is assumed that the (Right Shoulder) is selected.
  • It is assumed that an input with a character is invalid.
  • It is assumed that the angle values is from 0 to 360.
  • It is assumed that a size 0 for a size input is invalid.
  • The values that are inputted for size are below 100, otherwise there is a possibilty it will go off the animation area.
  • Each time a value is inputted, tester should press down on the Enter key.

Test Data:

  • Angle: {a}, {2a}, {50}, {270}, {default valid input}
  • Size: {a}, {2a}, {0}. {90}, {100}, {default valid input}

Technique: Myer's Algorithm used in selecting the test cases for this sequence:

  • The first four test cases groups one invalid input with valid inputs at a time.
  • The last four test cases group together all valid inputs together, covering them all at once.

Steps


Angle input 1

Actions:

  1. Enter input {a} into angle text box.
  2. Leave size input as it is (valid input).

Verify:

  • Pass: If the program accepts the input with an error dialogue box.
  • Fail: If the program accepts the input with no error dialogue box.


Angle input 2

Actions:

  1. Click on the reset button so figure is in default position.
  2. Enter input {2a} into angle text box.
  3. Leave size input as it is (valid input).

Verify:

  • Pass: If the program accepts the input with an error dialogue box.
  • Fail: If the program accepts the input with no error dialogue box.


Size input 1

Actions:

  1. Click on the reset button so figure is in default position.
  2. Enter input {a} into size text box.
  3. Leave angle input as it is (valid input).

Verify:

  • Pass: If the program accepts the input with an error dialogue box.
  • Fail: If the program accepts the input with no error dialogue box.


Size input 2

Actions:

  1. Click on the reset button so figure is in default position.
  2. Enter input {2a} into size text box.
  3. Leave angle input as it is (valid input).

Verify:

  • Pass: If the program accepts the input with an error dialogue box.
  • Fail: If the program accepts the input with no error dialogue box.


Size input 3

Actions:

  1. Click on the reset button so figure is in default position.
  2. Enter input {0} into size text box.
  3. Leave angle input as it is (valid input).

Verify:

  • Pass: If the program accepts the input with an error dialogue box.
  • Fail: If the program accepts the input with no error dialogue box.


Angle of Right Shoulder

Actions:

  1. Click on the reset button so figure is in the default position.
  2. Select the Right Shoulder of the stick figure.
  3. Enter input {50} into size text box.
  4. Enter input {90} into angle text box.

Verify:

  • Pass: If the Right Shoulder of the stick figure points North.
  • Fail: If the Right Shoulder of the stick figure does not point North.


Size of Left Hip

Actions:

  1. Click on the reset button so figure is in the default position.
  2. Select the Left Hip of the stick figure.
  3. Enter input {100} into size text box.
  4. Enter input {270} into angle text box.

Verify:

  • Pass: If Left Hip of the stick figure moves to the left; away from the stick figure.
  • Fail: If the wrong body part has been adjusted.


Size of Left Hip

Actions:

  1. Click on the reset button so figure is in the default position.
  2. Select the Upper Left Arm of the stick figure.
  3. Enter input {50} into size text box.
  4. Enter input {90} into angle text box.

Verify:

  • Pass: If Upper Left Arm of the stick figure (Upper Right Arm to users) points north and is slightly longer then the Upper Right Arm.
  • Fail: If the wrong body part has been adjusted then the test has failed.


Size of Lower Right Leg

Actions:

  1. Click on the reset button so figure is in the default position.
  2. Select the Lower Right Leg of the stick figure (area below the knee)
  3. Enter input {100} into size text box.
  4. Enter input {270} into angle text box.

Verify:

  • Pass: If the Lower Right Leg of the stick figure moves to the left of the body at an angle, and is longer than the Lower Left Leg.
  • Fail: If the wrong body part has been adjusted.

Test Sequence 3 - Frames and Play/Pause buttons

Purpose: To test that the frames in the keyframe can be edited/deleted and animate correctly. To test if the Play and Pause buttons function properly.

Prereq:

  • The frames in the keyframe are empty.
  • Can change the order of frames in the keyframe.
  • Cannot delete a frame while animating.

Test Data:

  • Clicking on the play button with {empty frames}, {One} {Two to five same poses}, {Two to five different keyframe poses}

Technique: Equivalence Partitioning used in selecting the test cases for this sequence.

Steps


Empty keyframe

Actions:

  1. Leave keyframe as it is (empty).
  2. Click the play button at the end of the keyframe (right-side).

Verify:

  • Pass: If no movement.
  • Fail: if there is any unacceptable behavior.

One frame, one pose

Actions:

  1. Select a frame.
  2. Click on a point/part of the stick figure.
  3. Move the part and/or change it's size.
  4. Click on the camera button to save the pose.
  5. Click the play button at the end of the keyframe (right-side).

Verify:

  • Pass: if the colored points disappear.
  • Fail: if the colored points remain visible or there is any unacceptable behavior.

Two to five frames, same pose

Actions:

  1. Select the first frame from the keyframe.
  2. Click on a point/part of the stick figure.
  3. Move the part and/or change it's size.
  4. Click on the camera button to save the pose.
  5. Select the second frame from the keyframe.
  6. Click on the camera button to save the same pose.
  7. Select the third frame from the keyframe.
  8. Click on the camera button to save the same pose.
  9. Click the play button at the end of the keyframe (right-side).

Verify:

  • Pass: if the stick figure in the edit area displays only one pose and the colored points disappear.
  • Fail: if the colored points remain visible or there is any unacceptable behavior.

Two to five frames, different poses

Actions:

  1. Select the first frame from the keyframe.
  2. Click on a point/part of the stick figure.
  3. Move the part and/or change it's size.
  4. Click on the camera button to save the pose.
  5. Select the second frame from the keyframe.
  6. Click on a point/part of the stick figure.
  7. Move the part and/or change it's size.
  8. Click on the camera button to save the new pose.
  9. Select the third frame from the keyframe.
  10. Move the part and/or change it's size.
  11. Click on the camera button to save the new pose.
  12. Click the play button at the end of the keyframe (right-side).

Verify:

  • Pass: if the stick figure animates correctly (according to the poses in each of the frames) and the colored points have disappeared.
  • Fail: if the colored points remain visible or there is any unacceptable behavior (the animation is wrong).