XO1.5 Bringup

From OLPC
Revision as of 20:43, 29 April 2009 by Wmb@firmworks.com (talk | contribs) (Swag at a bringup plan for 1.5)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This page lists goals and plans for initial bringup of the XO1.5 board.

Goals

  • EC working
  • Memory controller working and memory stable (memtest86)
  • OLPC display working
  • Keyboard/mouse working
  • USB working
  • SD memory cards working
  • Boots Linux kernel from SD card
  • Rudimentary power management tests from OFW
  • X?

Non-goals

  • Camera input (driver won't be ready in time)
  • Power management from Linux
  • SDIO WLAN
  • Audio

Personnel in Taiwan

  • Wad, Richard, and Mitch from OLPC
  • Gary from Quanta
  • Harald and BIOS/memory controller expert from Via

Tools

  • Cheetah SPI programmer qty ?
  • Artec LPC dongle (FLASH + port 80) qty 2 (3?)
  • Quanta LPC port 80 dongle
  • Cleverscope qty 1
  • PROMjet SPI FLASH emulator qty 1
  • OLPC serial port dongles + cables qty 5
  • High speed oscilloscope for memory checkout - Quanta to supply

Sequence

  • Richard goes first, brings up EC and power rails with Gary
  • Wad, Mitch, and Via BIOS/memory engineer arrive shortly thereafter, bring up memory controller
  • Harald arrives after OFW is working, brings up Linux
  • Team members work in parallel on the respective areas of expertise, hopefully with several boards