XO1.5 1.2V power sequencing ECO

From OLPC
Revision as of 03:29, 20 June 2009 by 71.174.55.223 (talk) (New page: =Scope= This describes a change to early prototypes of the XO-1.5 motherboard. It fixes a problem with the sequencing of power supply turn-on to the VX855 chip. This only applies to XO-...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Scope

This describes a change to early prototypes of the XO-1.5 motherboard. It fixes a problem with the sequencing of power supply turn-on to the VX855 chip.

This only applies to XO-1.5 A-phase (both A1 and A2) motherboards.

Procedure

  1. Remove R234. Use one pad to provide PRE_MAIN_ON.
  2. Lift PU7, pin 6 (near PL6) and tie it to PRE_MAIN_ON.
  3. Tie the MAIN_ON signal to +1.2V_GD.
  4. Remove PR67 (This is a quick fix. Ideally, pin 2 of PQ20 should be lifted and tied to an inverted, high voltage version of PRE_MAIN_ON).

Results

Done to: